Parking sensors reversing black front rear led 3d truck bus amio-03195

PARKING SENSORSxa0 WITH 3D LED DISPLAYParking assistant is a device that helps with parking and reversing a car. A universal and proven device for people who value safety on the road. The device is simple and functional, it starts automatically. Thanks to the ultrasonic probe, you will never hit any object with your car again. When reversing or parking, the device correctly recognizes obstacles on the road and warns the driver by signaling with a sound (appropriate to the distance from the obstacle) as well as information is shown on the display if the set is equipped with it. Device specification Power supply 12V DC Current consumption <4W Operating frequency: xa040KHz Device operating temperature -30 ° C to +55 ° CDistor detection 2.5 - 0.3m Measurement error +/- 5cm Cable length from sensors 2.2m Cable length from display 5m Set composition control unit display 8 black TRUCK 19MM sensors wiring mounting drill user manual The set contains sensor sensors that can be placed in any configuration at the front or rear of the car, thanks to which we increase safety in our vehicle. The sensors are activated automatically after engaging reverse gear in the case of rear sensors or by pressing the brake pedal for front sensors. The control unit is factory calibrated. The front sensors are activated by pressing the brake pedal (the brake lights come on). After pressing and releasing the brake pedal, the sensors work for 15 seconds. The system will turn on when an obstacle is detected within 80 cm of the vehicle. Obstacle detection is signalled by a distance indication, a graphic indication and additionally a sound via the built-in speaker. The set is equipped with high-class flat-collar sensors. The sensors are completely waterproof. They are also resistant to weather conditions such as snow, rain or fog. If necessary, it is possible to paint the sensors with 1-2 layers of paint (on your own). The set includes the necessary assembly elements: a drill with a hole saw, wiring such as a power cable and sensor cables, as well as a power supply unit, sensors and a display or buzzer depending on the set. Thanks to intuitive assembly and fastening elements, you can easily and quickly install the parking assistance system yourself. The product is universal, fits most cars, we also have extensions for delivery vans if the wiring from the set turns out to be too short.