Compact GPS receiver module with a u-blox 6 GPS SuperSense® chipset, integrated antenna and backup battery. Supports up to 50 channels, 1–5 Hz position updates, NMEA 0183 and satellite-based corrections. Designed for integration into equipment; connection cable not included.
Compact GPS receiver module with a u-blox 6 GPS SuperSense® chipset, integrated antenna and backup battery. Supports up to 50 channels, 1–5 Hz position updates, NMEA 0183 and satellite-based corrections. Designed for integration into equipment; connection cable not included.
Guarantee
24 month
Delivery from Europe in
10 - 15
business days
The Navilock NL-651EUSB is an assembled GPS module for integration into electronics and positioning systems. Manufacturer code 61845 and EAN 4043619618453 confirm this specific USB version. The integrated patch antenna and backup battery reduce the need for additional components.


The u-blox 6 GPS SuperSense® chipset receives GPS L1 signals and supports up to 50 channels. A 1–5 Hz update rate enables periodic delivery of a moving object's position to navigation or tracking software. Tracking sensitivity reaches −160 dBm, although actual reception depends on antenna placement and surroundings.
AssistNow Offline support enables the use of assistance data valid for up to 14 days to accelerate satellite acquisition. An internet connection is required to refresh this data. DGPS, WAAS, EGNOS and MSAS support allows positioning corrections to be used where available and correctly configured.
The USB interface is provided through a WTB connector. NMEA 0183 messages GGA, GSA, GSV, RMC and VTG deliver navigation data to compatible software; optional UBX protocol support is also specified. This is an integration module, so connector pin assignments, power supply and drivers must be checked before installation.
| Parameter | Value |
|---|---|
| Model / manufacturer code | NL-651EUSB / 61845 |
| EAN | 4043619618453 |
| Processor / chipset | u-blox 6 GPS SuperSense® |
| Signal / frequency | GPS L1 / 1575.42 MHz |
| Channels / update rate | Up to 50 / 1–5 Hz |
| Connector | Manufacturer specifies USB 2.0 WTB, 6-pin, 1.00 mm pitch |
| Power supply / current consumption | 5 V DC / 40–120 mA |
| Average acquisition times | Cold start: 30 s; warm start: 25 s; hot start: 3.5 s; reacquisition: 1 s |
| Positioning accuracy | 2.5 m CEP; with SBAS: 2.0 m CEP. CEP includes 50% of position fixes; results depend on conditions and corrections |
| Dimensions as specified | 30 × 30 × 7.9 mm |
| Device weight | 25 g according to distributor data |
| Operating temperature | With battery: −20 to +60 °C; without battery: −40 to +85 °C |