Navilock NL-852EUSB GNSS receiver module with USB 2.0, u-blox 8, integrated antenna and PPS (62575)
Product reference: 11-4043619625758

Compact GNSS receiver module with an integrated patch antenna, backup battery and u-blox 8 chipset. Its USB 2.0 interface uses a 6-pin WTB connector; update rates reach 18 Hz with a single GNSS system or 10 Hz with multiple systems. Designed for integration into compatible equipment.

Navilock NL-852EUSB GNSS receiver module with USB 2.0, u-blox 8, integrated antenna and PPS (62575)

Product reference: 11-4043619625758

Compact GNSS receiver module with an integrated patch antenna, backup battery and u-blox 8 chipset. Its USB 2.0 interface uses a 6-pin WTB connector; update rates reach 18 Hz with a single GNSS system or 10 Hz with multiple systems. Designed for integration into compatible equipment.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
103,67 €
107,99 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
10 - 15
business days

Your message has been successfully sent!
Fill in the required fields*

Navilock NL-852EUSB – USB 2.0 GNSS receiver module for integration

The Navilock NL-852EUSB is a fully assembled satellite navigation receiver module with an integrated patch antenna and backup battery. Manufacturer part number 62575 and EAN 4043619625758 identify this USB version. Measuring approximately 30 × 30 × 7.9 mm, it can be integrated into compact computing and other positioning solutions.

Navilock NL-852EUSB – USB 2.0 GNSS receiver module for integration

Multiple satellite navigation systems

The u-blox 8 UBX-M8030-KT chipset supports GPS, GLONASS, BeiDou, Galileo and QZSS signals and can receive signals from up to 72 satellites simultaneously. This provides more opportunities to use visible satellites for positioning. The manufacturer specifies firmware version 3.01 or later and NMEA 0183 4.1 for Galileo operation.

AssistNow online and offline assistance helps accelerate positioning by supplying satellite assistance data. SBAS augmentation signals are supported; the manufacturer lists WAAS, EGNOS, QZSS and MSAS. Specified positioning accuracy is 2.5 m CEP, or 2.0 m CEP with SBAS; actual results depend on reception conditions.

Frequent updates and PPS output

Update rates reach 18 Hz with a single GNSS system, such as GPS alone, or 10 Hz with multiple systems, such as GPS and GLONASS. This is useful for applications requiring frequently refreshed movement data. NMEA 0183 messages GGA, GSA, GSV, RMC and VTG provide navigation data to software that understands these formats.

Pin 6 provides a 3.3 V TTL PPS pulse signal for timing synchronization applications. A GPS status LED helps monitor module operation.

Integration and important limitations

The USB 2.0 interface is provided through a 6-pin WTB connector with a 1.0 mm pitch. An appropriate connection to the host device's USB interface and a compatible driver are required. This is an integration module, so installation and configuration require technical knowledge.

  • Provide the clearest possible view of the sky for satellite reception; buildings and other obstructions can increase positioning time.
  • Protect against water, high humidity and condensation. Do not connect a wet module.
  • The operating range with the battery is −20 to +60 °C. Do not leave it in direct sunlight inside a hot vehicle or expose it to fire.
  • Follow the manual when connecting the PPS output: sink current must remain below 100 mA.

Technical specifications

ParameterValue
Manufacturer and model Navilock NL-852EUSB
Manufacturer part number / EAN 62575 / 4043619625758
Processor / chipset u-blox 8 UBX-M8030-KT
Connector USB 2.0 via 6-pin WTB, 1.0 mm pitch
Supported frequency bands GPS L1, Galileo E1 and QZSS L1: 1575.4200 MHz; BeiDou B1: 1561.0980 MHz; GLONASS L1: 1602 + k × 0.5625 MHz
Sensitivity −167 dBm
Data rate Automatic detection up to 115200 bps
Startup Cold start: approximately 26 s; hot start: approximately 1 s
Power supply / current consumption 5 V DC / maximum 45 mA
Operating temperature With battery: −20 to +60 °C; without battery: −40 to +85 °C
Dimensions as specified Approximately 30 × 30 × 7.9 mm

Package contents

  • Navilock NL-852EUSB GNSS module.
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial