Black Navilock NL-8004U GNSS receiver with an integrated antenna, USB 2.0 Type-A plug and approximately 4.5 m cable. Supports GPS, GLONASS, BeiDou, Galileo and QZSS signals. Designed for navigation with a compatible computer and suitable software; its IPX7 housing and included mounting hardware allow installation on a vehicle roof.
Black Navilock NL-8004U GNSS receiver with an integrated antenna, USB 2.0 Type-A plug and approximately 4.5 m cable. Supports GPS, GLONASS, BeiDou, Galileo and QZSS signals. Designed for navigation with a compatible computer and suitable software; its IPX7 housing and included mounting hardware allow installation on a vehicle roof.
Guarantee
24 month
Delivery from Europe in
10 - 15
business days
The Navilock NL-8004U is a satellite positioning receiver with an integrated antenna and a u-blox 8 UBX-M8030-KT chipset. Connected to a computer running suitable navigation software, it supplies positioning data for following a route. The exact manufacturer part number is 62531 and the EAN is 4043619625314.


The receiver supports GPS, GLONASS, BeiDou, Galileo and QZSS signals and can process signals from up to 72 satellites simultaneously. Support for multiple systems provides more potential positioning signals, although actual reception depends on the surroundings and the antenna's view of the sky.
AssistNow online and offline assistance services and SBAS augmentation systems WAAS, EGNOS, QZSS and MSAS are supported. The manufacturer specifies positioning accuracy of 2.5 m CEP, or 2 m CEP with SBAS. This is a statistical accuracy measure rather than a guaranteed maximum error for every reading.
The update rate reaches 18 Hz when using a single GNSS system and 10 Hz in multi-GNSS mode. Frequent updates are useful for applications displaying the position of a moving vehicle. Supported NMEA 0183 messages GGA, GSA, GSV, RMC and VTG allow navigation data to be supplied to software compatible with this format.
The manufacturer specifies a cold start of approximately 26 seconds and a hot start of approximately 1 second. A GPS status LED helps you check the receiver's operating status.
The low-profile black housing is designed for mounting on the roof of a car, truck or bus. The included stainless steel nut and washer provide mechanical fastening. An approximately 4.5 m cable gives greater flexibility when positioning the computer inside the vehicle.
The housing has an IPX7 protection rating. This housing rating does not itself establish water resistance for an exposed USB connection. The receiver uses 5 V DC power through USB, with a specified maximum current consumption of 45 mA.
| Parameter | Value |
|---|---|
| Manufacturer and model | Navilock NL-8004U |
| Manufacturer part number / EAN | 62531 / 4043619625314 |
| Connector | 1 × USB 2.0 Type-A male |
| Processor / chipset | u-blox 8 UBX-M8030-KT |
| Satellite system frequencies | GPS L1: 1575.4200 MHz; GLONASS L1: 1602 + k × 0.5625 MHz; BeiDou COMPASS B1: 1561.0980 MHz; Galileo E1 and QZSS L1: 1575.4200 MHz |
| Satellites processed simultaneously | Up to 72 |
| Data rate | Automatic baud rate, up to 115200 bps |
| Update rate | Single GNSS: up to 18 Hz; multi-GNSS: up to 10 Hz |
| Sensitivity | Down to −167 dBm |
| Positioning accuracy | 2.5 m CEP; 2 m CEP with SBAS |
| Start time | Cold: approximately 26 s; hot: approximately 1 s |
| Power supply / current | 5 V DC / maximum 45 mA |
| IP protection rating | IPX7 |
| Operating temperature | −20 to +60 °C |
| Length | Approximately 4.5 m |
| Housing dimensions | Approximately 62 mm diameter × 21 mm height, excluding the threaded section |
| Colour | Black housing and cable |