White GNSS receiver with a built-in antenna, u-blox 8 chipset, 10 m cable and MD6 RS-232 connector. Designed for installation on boats, motorhomes or buses and use with compatible navigation software. Features a PPS output and IPX7 protection; the computer connection cable is sold separately.
White GNSS receiver with a built-in antenna, u-blox 8 chipset, 10 m cable and MD6 RS-232 connector. Designed for installation on boats, motorhomes or buses and use with compatible navigation software. Features a PPS output and IPX7 protection; the computer connection cable is sold separately.
Guarantee
24 month
Delivery from Europe in
10 - 15
business days
The Navilock NL-8222MP, manufacturer part number 62530, EAN 4043619625307, is a satellite positioning receiver with a built-in antenna and u-blox 8 UBX-M8030-KT chipset. It sends position data to a computer, allowing it to be used with suitable navigation software to follow a route on a boat, motorhome or bus.


The receiver supports GPS, GLONASS, BeiDou, Galileo and QZSS and can process signals from up to 72 satellites. AssistNow assistance data and SBAS support help with positioning acquisition and accuracy. The manufacturer specifies 2.5 m CEP accuracy, or 2 m CEP with SBAS; these figures are not guaranteed maximum errors.
Position updates reach up to 18 Hz with a single GNSS system or up to 10 Hz with multiple systems. Frequent updates are useful for applications displaying movement. Cold start takes approximately 26 seconds and hot start approximately 1 second.
NMEA 0183 messages GGA, GSA, GSV, RMC and VTG provide navigation data to compatible software. Pin 6 of the MD6 connector supplies a UTC-synchronised PPS signal for timing equipment that supports this input.
Connecting to a computer requires a separately sold cable. The manufacturer lists the Navilock 61264 MD6-to-USB cable, 61265 MD6-to-D-SUB 9 cable or 62907 MD6-to-D-SUB 9 cable with USB power.
The white housing is designed to blend into white vehicle surfaces. The approximately 10 m cable provides flexibility when positioning the receiver and computer. The threaded mounting is complemented by the included stainless steel nut and washer. The receiver has IPX7 protection and operates at temperatures from −20 to +60 °C.
| Parameter | Value |
|---|---|
| Model / manufacturer part number | NL-8222MP / 62530 |
| EAN | 4043619625307 |
| Processor / chipset | u-blox 8 UBX-M8030-KT |
| Connector | MD6 male, RS-232 |
| Data rate | Automatic, up to 115200 bit/s |
| PPS output | Pin 6, LVTTL 3.3 V |
| Sensitivity | Down to −167 dBm |
| Power supply / current | 5 V DC / up to 45 mA |
| Length | Approximately 10 m |
| Dimensions excluding thread | Approximately 62 mm diameter × 21 mm height |
| Colour / protection | White / IPX7 |
The manufacturer lists Windows Vista, 7, 8, 8.1, 10, Linux Kernel 2.6 and Mac OS X, as well as support for the 32-bit Microsoft Sensor and Location Platform interface. Suitable software and an MD6 connection cable are required. For Galileo support, the manufacturer specifies firmware version 3.01 and NMEA 0183 protocol version 4.1. This is an external receiver requiring a computer and software for navigation.