Navilock NL-8022MP GNSS receiver with MD6 RS-232, PPS, u-blox 8, 5 m cable, IPX7 (62529)
Product reference: 11-4043619625291

White external GNSS receiver with an integrated antenna, u-blox 8 chipset and approximately 5 m cable. Its MD6 RS-232 connection, PPS output and IPX7 protection suit installation on boats, motorhomes and buses. A suitable computer connection cable is selected and purchased separately.

Navilock NL-8022MP GNSS receiver with MD6 RS-232, PPS, u-blox 8, 5 m cable, IPX7 (62529)

Product reference: 11-4043619625291

White external GNSS receiver with an integrated antenna, u-blox 8 chipset and approximately 5 m cable. Its MD6 RS-232 connection, PPS output and IPX7 protection suit installation on boats, motorhomes and buses. A suitable computer connection cable is selected and purchased separately.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
154,42 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
10 - 15
business days

Your message has been successfully sent!
Fill in the required fields*

Navilock NL-8022MP – GNSS receiver for vehicle and computer navigation

The Navilock NL-8022MP is an external satellite navigation receiver with an integrated antenna and u-blox 8 UBX-M8030-KT chipset. Manufacturer part number 62529 and EAN 4043619625291 identify this specific model with an approximately 5 m cable. Combined with a laptop, a suitable connection cable and navigation software, it supplies positioning data for journeys and route monitoring.

Navilock NL-8022MP – GNSS receiver for vehicle and computer navigation

Signals from multiple satellite systems

The receiver supports GPS, GLONASS, BeiDou, Galileo and QZSS signals and can process signals from up to 72 satellites simultaneously. Using multiple systems allows more satellite signals to contribute to positioning. AssistNow supports online and offline assistance, while SBAS support enables the use of available satellite corrections.

The manufacturer specifies positioning accuracy of 2.5 m CEP, or 2 m CEP with SBAS. CEP is a statistical accuracy measure, so these figures do not guarantee a maximum error under all conditions. Cold start takes approximately 26 seconds and hot start approximately 1 second.

Data for navigation and integration

NMEA 0183 messages GGA, GSA, GSV, RMC and VTG provide navigation data to compatible software. The update rate reaches up to 18 Hz in single-GNSS mode and up to 10 Hz in multi-GNSS mode. More frequent updates are useful when monitoring a moving object's position.

Pin 6 of the MD6 connector provides a PPS signal with a 3.3 V LVTTL logic level. This is useful when integrating the receiver with equipment requiring a timing reference pulse. The RS-232 data interface and PPS output use different electrical levels, so the receiving equipment's requirements must be considered during connection.

White housing and outdoor installation

The low-profile white housing is designed for mounting on white surfaces on boats, motorhomes and buses. The approximately 5 m cable provides flexibility when positioning the receiver relative to the connected equipment. IPX7 protection and an operating temperature range of −20 to +60 °C support outdoor use when installation requirements are observed. A GPS status LED helps monitor receiver operation.

Connection and important limitations

The receiver cable terminates in a Navilock MD6 plug. Connecting to USB or a serial port requires a suitable MD6 connection cable purchased separately. The manufacturer lists Navilock cables 61264, 61265 and 62907 as optional accessories. Select the cable according to the computer port and power supply arrangement.

  • Navigation requires a computer and suitable software.
  • Manufacturer-listed operating systems are Windows Vista, 7, 8, 8.1, 10, Linux with kernel 2.6 and Mac OS X. Compatibility with newer systems must be checked separately.
  • For Galileo support, the manufacturer specifies firmware version 3.01 or later and NMEA 0183 version 4.1. Check the firmware version of the individual receiver.

Technical specifications

ParameterValue
Manufacturer and model Navilock NL-8022MP
Manufacturer part number / EAN 62529 / 4043619625291
Processor / chipset u-blox 8 UBX-M8030-KT
Antenna Integrated
Connector and data interface MD6 plug, RS-232
GPS / Galileo / QZSS frequency L1 / E1 / L1: 1575.4200 MHz
BeiDou frequency B1: 1561.0980 MHz
GLONASS frequency L1: 1602 + k × 0.5625 MHz
Simultaneously processed satellite signals Up to 72
Assistance features AssistNow online and offline; SBAS including WAAS, EGNOS and MSAS; QZSS support
Navigation messages NMEA 0183: GGA, GSA, GSV, RMC, VTG
Data rate Automatic baud rate, up to 115200 bps
PPS output Pin 6, 3.3 V LVTTL
Update rate Up to 18 Hz with a single GNSS system; up to 10 Hz with multiple systems
Sensitivity Down to −167 dBm
Positioning accuracy 2.5 m CEP; 2 m CEP with SBAS
Cold / hot start Approximately 26 s / approximately 1 s
Power supply 5 V DC
Maximum current consumption 45 mA
IP protection rating IPX7
Operating temperature −20 to +60 °C
Length Approximately 5 m
Dimensions excluding mounting thread Approximately 62 mm diameter × 21 mm height
Housing colour White

Package contents

  • GNSS receiver with MD6 connector.
  • Stainless steel mounting nut and washer.
  • Navilock support CD with driver and user manual.
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial