Satellite positioning receiver with an integrated antenna, u-blox 8 chipset and a 4-pin 3.5 mm TRRS LVTTL connector. Supports multiple satellite systems, NMEA 0183 output and updates up to 18 Hz in single-GNSS operation. Features a magnetic non-slip base, IPX6 protection and an approximately 1.5 m cable.
Satellite positioning receiver with an integrated antenna, u-blox 8 chipset and a 4-pin 3.5 mm TRRS LVTTL connector. Supports multiple satellite systems, NMEA 0183 output and updates up to 18 Hz in single-GNSS operation. Features a magnetic non-slip base, IPX6 protection and an approximately 1.5 m cable.
Guarantee
24 month
Delivery from Europe in
10 - 15
business days
The Navilock NL-8008T is an external satellite positioning receiver with an integrated antenna and a u-blox 8 UBX-M8030-KT chipset. Manufacturer part number 62586 and EAN 4043619625864 identify this specific model with an approximately 1.5 m cable. It supplies positioning data to compatible equipment through an LVTTL interface.


The receiver supports GPS, GLONASS, BeiDou, Galileo and QZSS signals and can receive signals from up to 72 satellites simultaneously. Using multiple systems provides a wider selection of satellites for positioning. The integrated antenna allows operation without a separate external antenna.
AssistNow assistance data can help establish the initial position sooner. Both online and offline assistance modes are supported. SBAS support enables the use of available satellite-based corrections: the manufacturer specifies positioning accuracy of 2.5 m CEP, or 2 m CEP with SBAS. These figures are not guaranteed maximum errors under every operating condition.
The update rate reaches up to 18 Hz when using a single GNSS system and up to 10 Hz when using multiple systems. Frequent updates are useful for monitoring a moving object's position when the receiving equipment and software support the selected mode.
Supported NMEA 0183 messages include GGA, GSA, GSV, RMC and VTG, providing position, movement and satellite information to compatible software. Automatic serial baud-rate detection is supported up to 115200 bps. The manufacturer specifies approximately 26 seconds for a cold start and approximately 1 second for a hot start.
The magnetic non-slip base helps keep the receiver stable on a suitable surface, while the approximately 1.5 m cable provides flexibility when choosing its position. An LED indicates GPS status. IPX6 protection and an operating temperature range of −20 to +60 °C accommodate a wider range of operating conditions; IPX6 does not mean the receiver is suitable for immersion.
The 4-pin 3.5 mm TRRS plug carries LVTTL interface signals. A socket of the same physical size is insufficient: check the receiving equipment's interface, pin assignment and power supply before connection. An ordinary headphone or microphone socket does not inherently provide compatibility.
For Galileo support, the manufacturer specifies receiver firmware version 3.01 or later and NMEA 0183 version 4.1. Older receivers may require an update. The manufacturer's system requirements list Windows Vista, Windows 7, Windows 8 and Linux kernel 2.6; compatibility with newer systems is not confirmed by this list.
| Parameter | Value |
|---|---|
| Manufacturer and model | Navilock NL-8008T |
| Manufacturer part number | 62586 |
| EAN | 4043619625864 |
| Processor / chipset | u-blox 8 UBX-M8030-KT |
| Connector | 4-pin 3.5 mm TRRS LVTTL male |
| Satellite systems | GPS, GLONASS, BeiDou, Galileo, QZSS |
| GPS, Galileo and QZSS frequency | 1575.4200 MHz; GPS L1, Galileo E1, QZSS L1 |
| BeiDou frequency | B1, 1561.0980 MHz |
| GLONASS signal | L1 |
| Simultaneously received satellites | Up to 72 |
| Assistance features | AssistNow online and offline; SBAS: WAAS, EGNOS, QZSS, MSAS |
| Output messages | NMEA 0183: GGA, GSA, GSV, RMC, VTG |
| Baud rate | Automatic detection, up to 115200 bps |
| Update rate | Up to 18 Hz with single GNSS; up to 10 Hz with multiple GNSS systems |
| Sensitivity | Up to −167 dBm |
| Positioning accuracy | 2.5 m CEP; 2 m CEP with SBAS |
| Start time | Cold: approximately 26 s; hot: approximately 1 s |
| Power supply | 5 V; current consumption up to 45 mA |
| IP protection rating | IPX6 |
| Operating temperature | −20 to +60 °C |
| Length | Approximately 1.5 m |
| Dimensions as specified | Approximately 65 × 45 × 22 mm |