Navilock NL-8004P GNSS receiver with MD6, PPS, u-blox 8, 5 m cable, IPX7 (62527)
Product reference: 11-4043619625277

Vehicle roof-mounted GNSS receiver with an integrated antenna, u-blox 8 chipset, MD6 connector and 5 m cable. Supports multiple satellite navigation systems, NMEA 0183 data and a PPS signal. A USB or serial connection cable is sold separately.

Navilock NL-8004P GNSS receiver with MD6, PPS, u-blox 8, 5 m cable, IPX7 (62527)

Product reference: 11-4043619625277

Vehicle roof-mounted GNSS receiver with an integrated antenna, u-blox 8 chipset, MD6 connector and 5 m cable. Supports multiple satellite navigation systems, NMEA 0183 data and a PPS signal. A USB or serial connection cable is sold separately.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
159,83 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
10 - 15
business days

Your message has been successfully sent!
Fill in the required fields*

Navilock NL-8004P – GNSS receiver for vehicles and computer-based navigation

The Navilock NL-8004P is an external satellite navigation receiver with an integrated active antenna and a u-blox 8 UBX-M8030-KT chipset. Manufacturer part number 62527 and EAN 4043619625277 identify this specific model with a 5 m cable. Connected to a laptop using a suitable optional cable and used with appropriate navigation software, it supplies positioning data.

Navilock NL-8004P – GNSS receiver for vehicles and computer-based navigation

Multiple satellite navigation systems

The receiver supports GPS, GLONASS, BeiDou, Galileo and QZSS signals and can process signals from up to 72 satellites simultaneously. Using multiple systems provides more satellite data for positioning. AssistNow assistance data is supported online and offline, while SBAS support allows available positioning corrections to be used.

The manufacturer specifies positioning accuracy of 2.5 m CEP, or 2 m CEP with SBAS. This is a statistical accuracy measure rather than a guaranteed maximum error in every environment. Specified acquisition times are approximately 26 seconds for a cold start and 1 second for a hot start.

Frequent position updates and PPS output

The update rate reaches up to 18 Hz with a single GNSS system, such as GPS alone, or up to 10 Hz with multiple systems, such as GPS and GLONASS. Frequent updates are useful for software tracking a moving vehicle.

NMEA 0183 messages GGA, GSA, GSV, RMC and VTG supply navigation data to compatible software. Pin 6 of the MD6 connector provides a PPS signal synchronised with UTC for time synchronisation of compatible equipment. The specified PPS logic level is LVTTL 3.3 V.

Roof mounting and MD6 connectivity

The low-profile round housing is designed for mounting on a car, truck or bus roof. The supplied stainless steel nut and washer secure the receiver in place. Its approximately 5 m cable allows the connector to be routed from the mounting location to the connected equipment.

The receiver has a Navilock MD6 plug. Connection to a USB or serial port requires a suitable connection cable purchased separately. The manufacturer lists MD6-to-USB cable 61264 and MD6-to-D-SUB 9 cables 61265 and 62907 as optional accessories; the latter receives power through USB.

Technical specifications

ParameterValue
Manufacturer / model Navilock NL-8004P
Manufacturer part number / EAN 62527 / 4043619625277
Processor / chipset u-blox 8 UBX-M8030-KT
Connector 1 × Navilock MD6 plug
Satellite systems GPS, GLONASS, BeiDou, Galileo, QZSS
Signal frequencies GPS L1, Galileo E1 and QZSS L1: 1575.42 MHz; BeiDou B1: 1561.098 MHz; GLONASS L1: 1602.5625–1615.5 MHz
Satellite signal processing Up to 72 simultaneously
Assistance technologies AssistNow online and offline; SBAS: WAAS, EGNOS, QZSS, MSAS
Data transfer rate Automatic selection, up to 115200 bps
Sensitivity Down to −167 dBm
Power supply 5 V DC; current consumption up to 45 mA
IP protection rating IPX7
Operating temperature −20 to +60 °C
Length Approximately 5 m
Dimensions as specified Approximately 62 mm diameter × 21 mm height, excluding the threaded section
Housing colour Black

System requirements and limitations

  • The manufacturer lists Windows Vista, Windows 7, Windows 8.1, Windows 10, Windows 11, Linux kernel 2.6 or later, and Mac OS.
  • A suitable MD6 connection cable and software supporting navigation data are required.
  • This is an external receiver rather than a standalone navigator with a display and maps.
  • The manufacturer specifies firmware version 3.01 for Galileo support; an older receiver may require its firmware version to be checked and updated.

Package contents

  • MD6 serial GNSS receiver with a 5 m cable.
  • Stainless steel mounting nut and washer.
  • Navilock support CD with driver and user manual.
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial