Roof-mounted GPS receiver with an integrated antenna, u-blox NEO-6P chipset, MD6 connector and approximately 5 m cable. Supports PPP and SBAS positioning enhancement, NMEA 0183 data and an update rate of up to 1 Hz. A USB or serial connection cable must be purchased separately.
Roof-mounted GPS receiver with an integrated antenna, u-blox NEO-6P chipset, MD6 connector and approximately 5 m cable. Supports PPP and SBAS positioning enhancement, NMEA 0183 data and an update rate of up to 1 Hz. A USB or serial connection cable must be purchased separately.
Guarantee
24 month
Delivery from Europe in
10 - 15
business days
The Navilock NL-6004P is an external GPS receiver with an integrated antenna for supplying positioning data to a computer or compatible system. Manufacturer part number 62447 and EAN 4043619624478 identify this specific model with an approximately 5 m cable.


The u-blox NEO-6P supports PPP and SBAS technologies. Their combination is useful in surveying, maritime and precision farming systems requiring improved positioning. AssistNow online and offline modes assist initial position acquisition, while integrated anti-jamming technology reduces the effects of radio interference.
The manufacturer specifies 2.5 m GPS accuracy and 2.0 m SBAS accuracy. With SBAS and PPP, the stated accuracy is below 1 m in two dimensions and below 2 m in three dimensions, using the R50 criterion. These results were demonstrated during a 24-hour stationary test, excluding the first 600 seconds, with HDOP below 1.5, strong signals and valid SBAS correction data continuously available. They do not guarantee this accuracy under all operating conditions.
The MD6 connector allows a separately purchased USB or serial adapter cable to be selected. The manufacturer lists the Navilock 61264 MD6-to-USB, 61265 MD6-to-D-SUB 9 and 62907 MD6-to-D-SUB 9 cable with USB power. NMEA 0183 messages supply positioning information to supporting software; an update rate of up to 1 Hz provides up to one data update per second.
The compact black IPX7 housing is suitable for outdoor use. The included stainless steel nut and washer allow installation on a car, truck or bus roof. The approximately 5 m cable provides flexibility when routing the connection to equipment inside the vehicle.
| Parameter | Value |
|---|---|
| Manufacturer and model | Navilock NL-6004P |
| Manufacturer part number / EAN | 62447 / 4043619624478 |
| Processor / chipset | u-blox NEO-6P |
| Connector | MD6 male |
| GPS frequency | L1, 1575.4200 MHz |
| Simultaneous signal reception | Up to 50 satellites |
| Sensitivity | Up to −160 dBm |
| Update rate | Up to 1 Hz |
| Data transmission rate | Automatic, up to 115200 bps |
| NMEA 0183 messages | GGA, GSA, GSV, RMC, VTG, GLL |
| Supported assistance systems | AssistNow; SBAS: WAAS, EGNOS, QZSS, MSAS |
| Cold / hot start | Approximately 38 s / approximately 1 s |
| Power supply | 5 V DC; maximum 60 mA |
| IP protection rating | IPX7 |
| Operating temperature | −20 to +60 °C |
| Length | Approximately 5 m |
| Dimensions excluding mounting thread | Approximately 62 mm diameter × 21 mm height |
The manufacturer lists Windows 2000, XP, Vista, 7, 8, 8.1, 10, Windows Mobile 4/5/6, Linux from kernel 2.4.x and Mac. A suitable MD6 connection cable is required. For OTG use, the manufacturer specifies Windows 10, an OTG-capable device and an additional OTG adapter. The specific Mac version and support for newer operating systems are not specified.
USB and serial adapter cables are not included.