Navilock NL-852ERS GNSS receiver module, u-blox 8, RS-232, PPS, integrated antenna (62576)
Product reference: 11-4043619625765

Compact GNSS receiver module with an integrated patch antenna and backup battery, designed for integration into equipment with an RS-232 interface. Features a u-blox 8 chipset, a 6-pin WTB connector and a 3.3 V PPS output. Dimensions are approximately 30 × 30 × 7.9 mm; power supply is 5 V DC.

Navilock NL-852ERS GNSS receiver module, u-blox 8, RS-232, PPS, integrated antenna (62576)

Product reference: 11-4043619625765

Compact GNSS receiver module with an integrated patch antenna and backup battery, designed for integration into equipment with an RS-232 interface. Features a u-blox 8 chipset, a 6-pin WTB connector and a 3.3 V PPS output. Dimensions are approximately 30 × 30 × 7.9 mm; power supply is 5 V DC.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
133,19 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
10 - 15
business days

Your message has been successfully sent!
Fill in the required fields*

Navilock NL-852ERS – GNSS receiver module with RS-232 and PPS

The Navilock NL-852ERS, manufacturer code 62576, EAN 4043619625765, is an assembled satellite positioning module with an integrated patch antenna and backup battery. It is designed for integration into electronic equipment requiring location data through an RS-232 serial interface. Its small dimensions help accommodate the module in designs with limited space.

Navilock NL-852ERS – GNSS receiver module with RS-232 and PPS

Multiple satellite systems

The u-blox 8 UBX-M8030-KT chipset supports GPS, GLONASS, BeiDou, Galileo and QZSS signals and can process signals from up to 72 satellites simultaneously. Multiple system support provides more options when selecting a positioning configuration for the intended application. Available system combinations and operating rates depend on configuration.

The manufacturer specifies firmware version 3.01 for Galileo support; Galileo data requires the appropriate configuration and NMEA 0183 version 4.1. Check the installed version before use.

Frequent position updates and assistance data

With a single GNSS system, such as GPS alone, the update rate reaches 18 Hz; in multiple-system operation, such as GPS and GLONASS, it reaches 10 Hz. This is useful for applications requiring frequently updated movement data.

AssistNow online and offline support enables the use of satellite assistance data to accelerate initial positioning. SBAS corrections, including WAAS, EGNOS and MSAS, can improve accuracy where available. The manufacturer specifies positioning accuracy of 2.5 m CEP and 2.0 m CEP with SBAS; this is a statistical measure rather than a guaranteed maximum error. Actual results depend on reception conditions.

Data transmission and time synchronisation

The 6-pin WTB connector with a 1.0 mm pitch connects the module to compatible RS-232 equipment. Supported NMEA 0183 messages GGA, GSA, GSV, RMC and VTG provide position and movement information to software that understands these messages. Automatic baud rate selection is supported up to 115200 bps.

Pin 6 provides a 3.3 V TTL-level PPS signal for time synchronisation of external electronics. A GPS status LED helps monitor receiver operation. Electrical compatibility of the PPS output must be assessed separately from the RS-232 data interface.

Technical specifications

ParameterValue
Manufacturer and model Navilock NL-852ERS
Manufacturer code 62576
EAN 4043619625765
Processor / chipset u-blox 8 UBX-M8030-KT
Connector 6-pin WTB, RS-232, 1.0 mm pitch
Satellite signal frequencies GPS L1, Galileo E1 and QZSS L1: 1575.4200 MHz; BeiDou B1: 1561.0980 MHz; GLONASS L1: 1602 + k × 0.5625 MHz
Simultaneously processed satellite signals Up to 72
Update rate Single GNSS: up to 18 Hz; multiple GNSS: up to 10 Hz
Sensitivity Down to −167 dBm
Cold start Approximately 26 s
Hot start Approximately 1 s
Positioning accuracy 2.5 m CEP; 2.0 m CEP with SBAS
PPS output Pin 6, 3.3 V TTL level
Power supply 5 V DC
Current consumption Up to 45 mA
Operating temperature With battery: −20 to +60 °C; without battery: −40 to +85 °C
Dimensions as specified Approximately 30 × 30 × 7.9 mm

Integration and important limitations

  • A compatible RS-232 interface, suitable connection cable, 5 V power supply and software capable of processing GNSS data are required. Integration requires electronics and GNSS knowledge.
  • This is an embedded module. Its WTB connector requires correct pin wiring; a physical connector match alone is insufficient.
  • Satellite reception requires the clearest possible view of the sky. Buildings and other obstructions can impair reception and extend initial positioning time.
  • Protect against moisture and overheating. Do not leave the module with its battery in direct sunlight where temperatures may exceed +60 °C. After a sudden temperature change, allow condensation to dry before switching it on.
  • According to the manual, PPS output sink current must remain below 100 mA; exceeding this limit may damage the circuit.
  • When using u-center for testing, close it before opening another application that uses the same serial port.

Package contents

  • Navilock NL-852ERS GNSS receiver module.
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial