Navilock NL-3331 GNSS Receiver, M8, GPS / GLONASS / Galileo, MT3333, IPX7, 0.5 m (60326)
Product reference: 11-4043619603268

The Navilock NL-3331 (60326, EAN 4043619603268) is a serial GNSS receiver with a MediaTek MT3333 chipset, integrated antenna, waterproof M8 connector and approximately 0.5 m cable. It supports GPS, GLONASS and Galileo, outputs NMEA 0183 V3.01 data and is suitable for vehicle roof installation. A suitable separate M8 connection cable and navigation software are required.

Navilock NL-3331 GNSS Receiver, M8, GPS / GLONASS / Galileo, MT3333, IPX7, 0.5 m (60326)

Product reference: 11-4043619603268

The Navilock NL-3331 (60326, EAN 4043619603268) is a serial GNSS receiver with a MediaTek MT3333 chipset, integrated antenna, waterproof M8 connector and approximately 0.5 m cable. It supports GPS, GLONASS and Galileo, outputs NMEA 0183 V3.01 data and is suitable for vehicle roof installation. A suitable separate M8 connection cable and navigation software are required.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
154,42 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
10 - 15
business days

Your message has been successfully sent!
Fill in the required fields*

Navilock NL-3331 – M8 GNSS receiver for vehicles

The Navilock NL-3331, manufacturer part number 60326, EAN 4043619603268, is an external serial satellite navigation receiver with a MediaTek MT3333 chipset and integrated antenna. Connected to a laptop running suitable navigation software, it supplies positioning data for navigation. Its housing is designed for installation on the roof of a car, truck or bus.

Navilock NL-3331 – M8 GNSS receiver for vehicles

GPS, GLONASS and Galileo reception

The receiver supports three satellite systems: GPS, GLONASS and Galileo. Its integrated antenna allows the complete receiver to be installed in the chosen location, while 33 tracking and 99 acquisition channels handle satellite signals. The manufacturer specifies positioning accuracy of 2.5 m CEP, or 2.0 m CEP with SBAS.

Positioning data for navigation software

NMEA 0183 V3.01 messages GGA, GSA, GSV, RMC and VTG provide navigation data to compatible software. The specified data rate is 9600 bps, with an update rate of 1–10 Hz. Cold start takes approximately 34 seconds, hot start approximately 1 second, and signal reacquisition approximately 1 second on average.

M8 connection and outdoor installation

The waterproof Navilock M8 plug allows a separately purchased connection cable to be selected to match the host equipment's connector. The receiver's approximately 0.5 m cable connects to that cable. Its IPX7 protection rating and operating temperature range of −20 to +60 °C make it suitable for outdoor use. The included stainless steel nut and washer provide mounting hardware for vehicle roof installation.

Technical specifications

ParameterValue
Manufacturer and model Navilock NL-3331
Manufacturer part number / EAN 60326 / 4043619603268
Processor / chipset MediaTek MT3333
Connector 1 × waterproof Navilock M8 plug
Satellite systems GPS L1, Galileo E1, GLONASS G1
GPS and Galileo frequency 1575.4200 MHz
Channel count 33 tracking, 99 acquisition
Data protocol NMEA 0183 V3.01: GGA, GSA, GSV, RMC, VTG
Data rate 9600 bps
Update rate 1–10 Hz
Sensitivity Down to −165 dBm
Positioning accuracy 2.5 m CEP; 2.0 m CEP with SBAS
Geodetic datum WGS 84
Dynamic limits Acceleration below 4 g; altitude up to 18,000 m; speed up to 515 m/s
Power supply 5 V DC
Current consumption Maximum 45 mA
IP protection rating IPX7
Operating temperature −20 to +60 °C
Length Approximately 0.5 m
Dimensions excluding thread Approximately 62 mm diameter × 21 mm height
Housing colour Black

System requirements and limitations

  • The manufacturer lists Windows Vista, Windows 7, Windows 8.1, Windows 10, Windows 11 and Linux Kernel 2.6.
  • A suitable M8 connection cable is required and purchased separately.
  • Navigation requires a computer and appropriate navigation software; this receiver is not a standalone navigator.
  • CEP is a statistical positioning accuracy measure, rather than a guaranteed maximum error. The specified 2.0 m accuracy applies when using SBAS.

Package contents

  • M8 serial GNSS receiver.
  • Stainless steel mounting nut and washer.
  • Navilock support CD containing the driver and user manual.
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial