Vehicle roof-mounted GNSS receiver with an integrated antenna, u-blox 8 chipset, MD6 connector and 10 m cable. Supports multiple satellite systems, NMEA 0183 and a PPS output. The USB or serial connection cable is purchased separately.
Vehicle roof-mounted GNSS receiver with an integrated antenna, u-blox 8 chipset, MD6 connector and 10 m cable. Supports multiple satellite systems, NMEA 0183 and a PPS output. The USB or serial connection cable is purchased separately.
Guarantee
24 month
Delivery from Europe in
10 - 15
business days
The Navilock NL-8044P is an external satellite navigation receiver with an integrated active antenna, designed for use with a laptop and suitable navigation software. Manufacturer code 62528 and EAN 4043619625284 identify the version with a 10 m cable.


The u-blox 8 UBX-M8030-KT chipset processes signals from up to 72 satellites simultaneously. Supported systems include GPS, GLONASS, BeiDou, Galileo and QZSS. This provides additional signal sources for positioning, although actual reception depends on the environment and receiver configuration. The manufacturer associates Galileo support with firmware version 3.01 and specifies NMEA 0183 version 4.1 for extended satellite data.
AssistNow online and offline support allows the use of satellite assistance data. SBAS support enables positioning corrections: the manufacturer specifies 2.5 m CEP accuracy, or 2.0 m CEP with SBAS. These are statistical figures rather than guaranteed error limits for every measurement.
NMEA 0183 messages GGA, GSA, GSV, RMC and VTG provide navigation data to compatible applications. Update rates reach 18 Hz with a single GNSS system or 10 Hz with multiple systems, allowing movement data to refresh more frequently than once per second.
Pin 6 of the MD6 connector provides a PPS signal synchronized with UTC time. This output is useful for time synchronization with compatible equipment and uses a 3.3 V LVTTL level.
The low-profile black housing is designed for mounting on car, truck or bus roofs. The approximately 10 m cable makes routing to a computer easier in larger vehicles. A stainless steel nut and washer are included. IPX7 protection and an operating temperature range of −20 to +60 °C support outdoor use in accordance with installation requirements.
The receiver cable terminates in a Navilock MD6 plug. Connecting it to a computer requires a separately purchased compatible MD6-to-USB or MD6-to-serial connection cable. Suitable navigation software and a 5 V DC power supply are also required. The manufacturer lists Linux kernel 2.6 or later, Mac OS and Windows Vista/7/8.1/10/11; compatibility of the connection cable and its drivers must be checked separately.
| Parameter | Value |
|---|---|
| Manufacturer and model | Navilock NL-8044P |
| Manufacturer code / EAN | 62528 / 4043619625284 |
| Processor / chipset | u-blox 8 UBX-M8030-KT |
| Connector | MD6 plug |
| Frequency bands | GPS L1, Galileo E1 and QZSS L1: 1575.4200 MHz; BeiDou B1: 1561.0980 MHz; GLONASS L1: manufacturer notation 1602 (k × 0.5625) MHz |
| Assistance systems | AssistNow online and offline; SBAS: WAAS, EGNOS, QZSS, MSAS |
| Data rate | Automatic baud rate detection, up to 115200 bit/s |
| Sensitivity | Down to −167 dBm |
| Start-up time | Cold start approximately 26 s; hot start approximately 1 s |
| Power supply / current | 5 V DC / up to 45 mA |
| Length | Approximately 10 m |
| Housing dimensions | Approximately 62 mm diameter × 21 mm height, excluding thread |
| Protection / operating temperature | IPX7 / −20 to +60 °C |