GNSS receiver with an integrated antenna and u-blox 8 EVA-M8Q chipset for navigation with a computer and suitable software. Supports GPS, GLONASS, Galileo, BeiDou and QZSS signals, with a USB 2.0 Type-A plug, approximately 1.5 m cable, magnetic non-slip base and IPX6 housing.
GNSS receiver with an integrated antenna and u-blox 8 EVA-M8Q chipset for navigation with a computer and suitable software. Supports GPS, GLONASS, Galileo, BeiDou and QZSS signals, with a USB 2.0 Type-A plug, approximately 1.5 m cable, magnetic non-slip base and IPX6 housing.
Guarantee
24 month
Delivery from Europe in
10 - 15
business days
The Navilock NL-802U is an external satellite navigation receiver with an integrated antenna and u-blox 8 EVA-M8Q chipset. Connected to a computer running suitable navigation software, it supplies positioning data for following a route. The exact manufacturer part number for this version is 62781, with EAN 4043619627813.


The receiver supports GPS, GLONASS, Galileo, BeiDou COMPASS and QZSS signals and can process signals from up to 72 satellites simultaneously. Support for multiple systems broadens the selection of signals available for positioning. The manufacturer specifies sensitivity down to −164 dBm.
AssistNow online and offline assistance and SBAS augmentation systems are supported. The manufacturer specifies positioning accuracy of 2.5 m CEP, or 2 m CEP with SBAS. These are statistical figures rather than a guaranteed maximum error at every location.
Update rates reach up to 18 Hz with a single GNSS system and 10 Hz with multiple systems. More frequent data updates are useful for applications that need to follow movement smoothly. Support for NMEA 0183 messages GGA, GSA, GSV, RMC and VTG allows navigation data to be passed to software that understands these messages.
The manufacturer specifies a cold start of approximately 26 seconds and a hot start of approximately 1 second. A GPS status LED helps you monitor receiver status.
The USB 2.0 Type-A plug connects to a compatible device's USB port. The approximately 1.5 m cable allows the receiver to be placed away from the computer in a more suitable signal reception position. Its magnetic non-slip base helps secure it to a suitable metal surface.
The IPX6 housing resists powerful water jets, allowing outdoor use within the specified operating temperature range. IPX6 does not indicate protection against immersion; the manufacturer does not separately specify water protection for the USB connection.
| Parameter | Value |
|---|---|
| Manufacturer / model | Navilock NL-802U EVA-M8Q |
| Manufacturer part number / EAN | 62781 / 4043619627813 |
| Processor / chipset | u-blox 8 EVA-M8Q |
| Connector | 1 × USB 2.0 Type-A male |
| Satellite systems | GPS, GLONASS, Galileo, BeiDou COMPASS, QZSS |
| Reception frequencies | GPS L1, Galileo E1 and QZSS L1: 1575.4200 MHz; BeiDou B1: 1561.0980 MHz; GLONASS L1: manufacturer notation 1602 (k × 0.5625) MHz |
| Simultaneous signal processing | Up to 72 satellites |
| Assistance systems | AssistNow online and offline; SBAS: WAAS, EGNOS, QZSS, MSAS |
| Update rate | Up to 18 Hz with single GNSS; up to 10 Hz with multiple GNSS |
| NMEA 0183 messages | GGA, GSA, GSV, RMC, VTG |
| Automatic baud rate detection | Up to 115200 bps |
| Sensitivity | Down to −164 dBm |
| Positioning accuracy | 2.5 m CEP; 2 m CEP with SBAS |
| Start times | Cold start: approximately 26 s; hot start: approximately 1 s |
| Power supply / current | 5 V DC / maximum 45 mA |
| IP protection rating | IPX6 |
| Operating temperature | −10 to +50 °C |
| Length | Approximately 1.5 m |
| Dimensions as specified | Approximately 65 × 45 × 22 mm (length × width × height) |
| Housing and cable colour | Black |