Non-contact thermometer for children

Non-contact infrared thermometer. Technical data:

• Measurement range: 32.0°C~42.9°C
• Accuracy: ±0.3°C
• Minimum error: 0.1°C
• Automatic shut-off after one minute of non-use
• Memory: 10 measurements
• Battery: CR2032 3.0V (lithium battery)
• Number of measurements: 2500 times (after this many measurements, a new battery must be replaced)
• Certification: CE 0197, 93/42/EEC

Instructions for use: 1. Power on. Press the ON/RECALL button on the other side of the thermometer. After 1-2 seconds, you will hear a beep and many symbols will appear on the screen. When the symbols go out after 1-2 seconds and the numbers 0.00 C remain on the screen, then you can measure the temperature. 2. Measurement. Place the thermometer 1-3 cm away from the forehead and press the 'scan' button on the front of the thermometer. 3. Readings. After 1-2 seconds, the numbers with your temperature will appear on the screen. If your temperature is normal, the screen will turn green, if it is slightly elevated, it will turn orange, and if you have a high fever, the screen will turn red. 4. Memory. Press the ON/RECALL button on the other side twice, and you will see the letter M on the display. Press the button again and it will show the 10th temperature measured previously, press it again and the thermometer will show the 9th temperature, etc. In this way, the thermometer will show 10 previously measured temperatures.