Cable locator and circuit tester with audio signal generator and amplifier probe for locating wires, determining cable routes and checking circuit integrity. Suitable for telephone, twisted pair, network, coaxial, audio and video and non-voltage AC cables up to 1.5 km away; operates in TONE and CONT modes.
Cable locator and circuit tester with audio signal generator and amplifier probe for locating wires, determining cable routes and checking circuit integrity. Suitable for telephone, twisted pair, network, coaxial, audio and video and non-voltage AC cables up to 1.5 km away; operates in TONE and CONT modes.
Guarantee
24 month
Delivery from Europe in
4 - 5
business days
Cable locator and circuit tester with tone generator and amplifier probe for locating wires, tracing cable routes and checking integrity. Suitable for telephone, twisted pair, network, coaxial, audio and video, as well as de-energized AC cables up to 1.5 km long. Works in TONE and CONT modes.
Product information | |
|---|---|
| Product type | Cable locator and circuit tester |
| Components | Tone generator and amplifier probe |
| Main uses | Wire identification, cable route tracing, integrity testing and telephone line diagnostics |
Technical specifications | |
| Operating modes | TONE / OFF / CONT |
| Tone frequency | 0.6-2kHz |
| Tone signal | Single or dual tone signal |
| Integrity check threshold | 10 Ω |
| Maximum signal voltage | 8 Vp-p |
| Voltage protection | Up to 48 V DC |
| Maximum operating current of the tone generator | 20 mA |
| Maximum amplifier probe operating current | 70 mA |
| Tone generator connector | RJ11 (6P2C) and crocodile clips |
| Amplifier probe connector | Headphone jack |
| Maximum inspection distance | Up to 1.5 km |
Compatible cables | |
| Supported cable types | Telephone, twisted pair, network, Cat3 and other voice and data cables, coaxial, audio and video, single-core, multi-core and de-energized AC cables |
| Telephone line diagnostics | Determines the status of a free, ringing, and busy line and checks the polarity of the line |
Power supply and construction | |
| Power source | Two 9V DC batteries - one for each device; batteries not included |
| Additional features | Non-contact signal detection, headphone output and low battery indicator |
| Tone generator dimensions | 57 × 56 × 32 mm |
| Amplifier probe dimensions | 235 × 55 × 25mm |
| Tone generator weight | 97 grams |
| Amplifier probe weight | 116 g |
Safety warning | |
| Safe use | Use only for intended purpose - tracing and testing cables. Only test AC cables when they are de-energized. 48 V DC protection is not a substitute for safe electrical isolation. Do not connect the tester to mains voltages or circuits exceeding the specified limits. |
| Height | 80mm |
| Length | 350mm |
| Weight | 300g |
| Width | 120mm |