DEPOW deWB22B10A_DL - wall-mounted 22 kW electric vehicle charging station with a 10 m cable and 1 or 3-phase connection. Wi-Fi and Bluetooth connectivity allow you to adjust the charging current from 6 to 32 A, create charging schedules, control the device remotely, and monitor charging.
DEPOW deWB22B10A_DL - wall-mounted 22 kW electric vehicle charging station with a 10 m cable and 1 or 3-phase connection. Wi-Fi and Bluetooth connectivity allow you to adjust the charging current from 6 to 32 A, create charging schedules, control the device remotely, and monitor charging.
Guarantee
24 month
Delivery from Europe in
8 - 9
business days
DEPOW deWB22B10A_DL - wall-mounted Type 2 electric vehicle charging station with a maximum power of 22 kW. It has a 10-meter cable and can be used with single-phase or three-phase electrical inputs. Wi-Fi and Bluetooth connectivity allow you to adjust the current from 6-32 A in the app, set charging schedules, control the station remotely and monitor charging.
Product information | |
|---|---|
| Product type | Wall-mounted AC electric vehicle charging station |
| Brand | DEPOT |
| Model | deWB22B10A_DL |
| Maximum charging power | 22 kW |
| Charging connector | Type 2 |
| Supported electrical inputs | Single-phase or three-phase |
| Input voltage | 400V AC |
| Frequency | 50Hz |
Control and communication | |
| Connection | Wi-Fi and Bluetooth |
| Control method | Mobile app |
| Screen | LCD |
| App features | Remote start and stop, real-time monitoring, charging schedules and charging history |
| Standby power consumption | Less than 5W |
Protection and Terms of Use | |
| Residual current protection | Type B RCD; detects 30 mA AC and 6 mA DC current |
| Additional protections | Protection against overload, overvoltage, undervoltage, leakage current and short circuit, grounding and temperature monitoring |
| Housing protection | IP54; IP55 when connected with Type 2 connector |
| Operating temperature | −25°C-55°C |
| Storage temperature | −40°C-80°C |
| Operating humidity | 5-95% relative humidity, non-condensing |
| Status indicators | Power, standby, charging and error |
Construction and installation | |
| Control module dimensions | 297 × 214 × 105mm |
| Installation | Wall mounted |
| Intended location | Indoors or in properly prepared outdoor areas |
Safety warning | |
| Warning | Only intended for charging Type 2 electric vehicles. Installation and electrical connection must be carried out by a qualified electrician in accordance with local regulations. Do not use the charger if the cable, connector, housing or electrical installation is damaged. The station installed outdoors must be adequately protected from the environment. |
| Height | 200mm |
| Length | 1200mm |
| Weight | 4200 grams |
| Width | 400mm |