Neoline Fuse Cord X77 - zestaw zasilania z ACC do X77

Neoline Fuse Cord X77 The original Neoline X7 series power supply kit (cable, power supply, recorder mount) allows for a hidden installation in the car that provides the video recorder with continuous +12/24V power, e.g., from the fuse box, and ignition-switched voltage (ACC or ignition). This allows the recorder to automatically switch to parking mode when the ignition is turned off, and to re-engage normal recording mode when the vehicle's engine is started (after turning on the ignition/ACC).

The "Fuse Cord X77" kit is designed for Neoline G-Tech X77 recorders. For proper operation, the magnetic recorder mounting bracket included in this kit must be used. The video recorder must have the latest system software installed, which can be downloaded from the manufacturer's website or from the Polish website https://neoline-polska.pl/aktualacje/.

Activating the automatic parking mode on/off option in Neoline G-Tech X77:

Update your dash cam's system software to the latest available version. Install the magnetic holder included in the "Fuse Cord X77" kit and connect it to the vehicle's installation using a 3-wire cable. In the recorder menu, set the "Parking Mode" function to "On" and make additional settings for this mode in accordance with the user manual. After turning the car ignition off/on (ignition/ACC), the recorder will automatically turn on/off parking mode. If you sometimes do not want to use parking mode when the ignition is off, briefly press the recorder's power button (ON/OFF).

BASIC TECHNICAL DATA:

3-wire cable with power supply and micro-USB plug for continuous power supply of Neoline G-Tech X77 video recorders: BATT - yellow wire: +12/24V voltage that does not disappear after turning off the car's ignition ACC - red wire: +12/24V voltage (ACC or ignition), which disappears when the ignition is turned off GND - black wire: power supply ground (-12V/24V), e.g. metal parts of the car body Magnetic holder with GPS for mounting the recorder, which should be mounted in place of the holder supplied with the recorder. Automatically turns parking mode on and off when the car ignition is turned off/on. It allows for an aesthetically concealed power supply connected to the socket in the recorder mounting bracket. It does not take up space in the car cigarette lighter socket, allowing you to connect other devices to it. The previously used holder can be mounted in a second car and the recorder can be used interchangeably in both vehicles. Power supply input voltage: 12 - 24 V. Power supply output voltage: 5V/1.5A A system that protects the battery against deep discharge, which disconnects the recorder's power supply when the voltage in the installation drops below: - 11.6 V for vehicles with 12 V installation - 23.2 V for vehicles with 24 V installation Fuses mounted on wires. Cable length: 3 m. Cable diameter: 3.5 mm. Warranty: 24 months.

ATTENTION ! Proper operation of the power supply kit with the Neoline G-Tech X77 video recorder is only possible when using the magnetic mount included in the "Fuse Cord X77" kit. The mount supplied with the recorder must be replaced with the mount from the "Fuse Cord X77" kit.