Mercedes ntg 3.5 rear view camera interface

DescriptionVideo interface suitable for Mercedes with Comand APS NTG3.5 navigation. For connecting any two video sources and a reversing camera.The video interface allows you to connect a reversing camera and two other video sources (e.g. USB player, DVB-T2 tuner, ...) to the vehicle manufacturer's factory infotainment system.xa0 xa0 xa0 2 video inputs for external devices (e.g. DVD player, DVB-T tuner). 1 rear view camera video input Automatic switching to the rear view camera input when reverse gear is engaged Activation of the image while driving (only for connected video) Compatible with the factory rear view camera NTSC inputsBrand and model: xa0 xa0 Mercedes S (W221) 06/2009 - 06/2013 Mercedes CL (C216) 06/2009 - with Dual - View xa0 Navigation: Comand APS HD NTG3.5 with Dual View and Non-Dual Monitor.Limitations: Video only -xa0The interface ONLY supplies video signals to the infotainment system. The existing factory AUX audio input or FM modulator can be used to supply the audio signals. Factory rear view camera -xa0xa0Automatic switching to RFK only as long as reverse gear is engaged. Additional electronics are required to delay downshifting. Video Input Signal -xa0Only NTSC video sources compatible.Connections: Image Input: 4-pin HSD Power and CAN Bus: Plug Play (vehicle dependent) Video Inputs (2x): Cinch sockets Reversing camera input: RCA socket Audio Switch: 2 x RCA sockets (2 inputs to 1 output)Technical Data: Operating Voltage :xa012 V DC (7 ~ 25 V) Quiescent Currentxa0: <5mA Current Consumption :xa0300mA Video Input :xa00.7 ~ 1 V Video Input Formats :xa0NTSC Operating Temperature :xa0 -40°C to +85°C Video Box Dimensions: 182 x 24 x 100 mm (W x H x D) CAN Box Dimensions:xa073 x 22 x 45 mm (W x H x D)