FNIRSI DMT-99 - smart digital multimeter with 2.4 inch TFT color screen, true RMS value measurement, automatic measurement recognition and data logging. It can measure AC and DC voltage and current, resistance, capacitance, frequency, temperature from -55 °C to 1,300 °C, check circuit integrity, diodes, LIVE wires and NCV voltage.
FNIRSI DMT-99 - smart digital multimeter with 2.4 inch TFT color screen, true RMS value measurement, automatic measurement recognition and data logging. It can measure AC and DC voltage and current, resistance, capacitance, frequency, temperature from -55 °C to 1,300 °C, check circuit integrity, diodes, LIVE wires and NCV voltage.
Guarantee
24 month
Delivery from Europe in
15 - 16
business days
FNIRSI DMT-99 - smart digital multimeter with 2.4-inch TFT color display, True RMS technology, automatic measurement recognition and data logging function. It measures AC and DC voltage and current, resistance, capacitance, frequency, temperature from -55 °C to 1,300 °C, checks circuit integrity, diodes, LIVE wires and NCV voltage.
Product information | |
|---|---|
| Product type | Smart Digital Multimeter |
| Brand | FNIRSI |
| Model | DMT-99 |
| Screen | 2.4 inch HD TFT color screen |
| Resolution | 10,000 sections |
| Housing material | ABS |
| Approximate weight | 200g |
Measurement specifications | |
| DC voltage | 9.999-999.9 V; accuracy ±(0.5% + 3) |
| Alternating voltage | 9.999-750.0 V; accuracy ±(1 % + 3) |
| Direct current | 9.999 µA-9.999 A; accuracy ±(1.2% + 3) |
| Alternating current | 9.999 µA-9.999 A; accuracy ±(1.5% + 3) |
| Resistance | Up to 99.99 MΩ; accuracy ±(1.5% + 3) |
| Capacity | 9.999 nF-99.99 mF; accuracy ±(2.0% + 5) or ±(5.0% + 20), depending on range |
| Frequency | 9.999 Hz-9.999 MHz; accuracy ±(0.1% + 2) |
| Temperature | -55°C-1300°C; accuracy ±(2.5% + 5) |
| Additional tests | Circuit integrity and diode testing |
Power and protection | |
| Battery | Built-in 1,500 mAh rechargeable lithium battery |
| Charging connector | USB-C |
| Current input protection | Up to 10 A, with fuse |
| Fuse parameters | 10A; 750V AC / 1000V DC |
| Automatic shutdown | Yes |
Functions and interfaces | |
| Measurement modes | General, recording and monitoring modes |
| Detection functions | Non-contact voltage detection (NCV) and LIVE phase and neutral wire detection |
| Alternating current measurement | True RMS |
| Data functions | Data logging, waveform recording, minimum and maximum value display, HOLD and relative measurement |
| Warnings | Audible alerts for circuit integrity, monitoring limits, and detected voltage |
| User interface | DIY Boot Interface |
| Design features | Foldable stand, belt clip and rear hook |
Safety warning | |
| Use the instrument only within the specified measurement ranges and with the test leads properly connected. Never measure voltage when the leads are connected to the current input. Disconnect the power supply before measuring resistance, capacitance, continuity or diodes. The NCV and LIVE functions are only auxiliary detection tools and should not be considered proof that the circuit is safe; check the circuits by proper contact measurement. When working with hazardous or mains voltage equipment, wear appropriate personal protective equipment and consult a qualified electrician. | |
| Height | 60mm |
| Length | 220mm |
| Weight | 300g |
| Width | 120mm |