Motorcycle LED Bulb 6000K H1 FLIP CHIP USA 12/24V EPLHM31

- is an innovative technology for mounting LED chips that eliminates many of the disadvantages typical of technologies commonly used on the market:

• UNIQUE HEAT MANAGEMENT
• UNIQUE LIGHT EMISSION
• UNIQUE ELECTRO-MECHANICAL PARAMETERS
• UNIQUELY LOW COST

1. In a conventional LED, significant amounts of heat are dissipated through the front of the diode.2 In a diode of the type FLIP CHIP It was possible to dissipate most of the heat through the substrate, which allows for more efficient heat dissipation. A conventional LED has a high thermal resistance due to the low thermal conductivity of the sapphire substrate. Significant amounts of heat are emitted from the active layer through the front of the diode, the encapsulation material, and then dispersed in the air. The diode is made using the technology Flip Chip is designed on a thermally conductive substrate with metal connections to create a better path for most of the heat to dissipate through the substrate. Thanks to this solution, the light source uses technology FLIP CHIP LED is significantly cooler. This allows for the elimination of expensive and large heat sinks and greater freedom in designing lighting solutions. The problem that hinders light extraction from the chip is the metal contacts, which obscure part of the light-emitting surface. In conventional LEDs, losses associated with the traditional mounting method reach 20%. This problem does not occur with flip chip, which do not use wires to connect LED chips. Advantages: • Reduction in weight and price of the finished lighting element thanks to the possibility of eliminating heavy and expensive radiators • Long service life (up to 60,000 hours of operation )• Illumination of the entire surface, instead of point sources typical of regular diodes and POWER LEDs• Absolutely flat shape of the lighting module enabling the use of innovative mounting methodsThanks to the use of the latest technology using diodes FLIP CHIP, it was possible to design a small bulb (the small bulb base allows installation in very small lenses, e.g. in the Fiat Punto II, where most LED bulbs are too large), at the same time, it was possible to build in systems that cheat the Canbus system in cars (e.g. Opel Insignia does not display the burnt out bulb error ). High light efficiency of the diodes FLIP CHIP along with high current intensity at the level 2.3 amps, at a voltage of 14.4V allowed us to obtain over 5000lm from one bulb. Small construction, narrow bulb base, no external components (module/driver) enables much simpler installation in most cars than in the case of competing bulbs. Type H1 Color 6000K (COOL WHITE) Diode type FLIP CHIP Brightness 5000lm / bulb Power 34W Operating voltage 9V - 32V Operating temperature -40°C to +50°C Canbus Yes Removable base Yes Destiny Off-road Guarantee 12 Months The diodes are placed at the same height as the light source in a standard halogen bulb, which allows us to achieve the so-called "cut-off" effect, so that when driving with our bulbs we do not blind anyone. Not ECEC compliant. For off-road use only. Use on public roads may result in a fine, confiscation of the vehicle's registration certificate, or, in the event of a collision, loss of insurance coverage.