KONNWEI KW208 12V Car Battery Load Tester

KONNWEI KW208 12V car, vehicle battery tester can effectively analyze and read important car data such as voltage, internal resistances, cold cranking amps and AH capacity, battery condition and charging status. This provides accurate results, calculates the battery's cold cranking capacity and the degree of ageing, resulting in faster and more accurate car repairs. Test results are displayed in both text and graphs, but real-time battery voltage is displayed as a waveform. With a 2.4" backlight and STM32 main chip, access to the reading is practical and fast! The lifetime update service is supported by the KONNWEI BTlink app.

The KW208 can test all 12V 100-2000CCA batteries, including conventional, AGM flat, AGM spiral or gel batteries. It provides an overall analysis of the condition of the batteries and helps you to know their condition in advance before they are discharged. The KW208 battery tester supports the test of the battery starting and charging system, as well as the test of the AC generator and starter.

The KW208 12V Battery Load Tester provides basic battery parameters such as voltage, internal resistance, cold cranking amps and AH capacity, battery condition and charging status. In addition, the battery load tester will also show you whether to replace or recharge the battery.

The KW208 Battery Load Analyser allows you to check batteries both inside and outside the car, and even check dead batteries. Simply connect the tester's clips to the battery and it will switch on and be ready to test and analyse the battery.

The KW208 is not only a great battery load tester for testing the charging and charging system of batteries, but also for checking the charging conditions of the alternator and starter. In addition, it can switch up to 8 languages to meet different needs.

Strong capacity: Works with 12V batteries, 100-2200 CCA, including starter and alternator tester.

Testing standards: (ANGL. CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE).

Can be tested in and out of the car without removing the battery.

Battery condition test, starting test and charging test.

Suitable for car factory, garage, car battery manufacturer and DIY enthusiasts etc.