Switch, MIKROTIK, PoE ports 1, CRS305-1G-4S+IN

System solutions for platforms of the company MikroTik for providers of wireless internet connection.
Cloud Router Switch 305-1G-4S+IN is a 5-portový switch in a desktop version, powered by the operating system SwOS or RouterOS, with four SFP+ slots and one GB ethernet port.
Je tak ideálním modulárnym rozúpém pre rozvod opticých trás v frajm danej lokáky.
The switch is equipped with two redundant power inputs (12 - 57 V DC connector) and a passive cooler that enables silent operation. preferredovaného operačného systému - RouterOS alebo SwOS.
Z podorovaných funkő a vyštění:
• 4 ports SFP+
• 1 port Gigabit Ethernet
• Non-Blocking bandwidth: 41 Gbps
• Transmission capacity: 82 Gbps
• Transmission speed: 61 Mpps
• 2 connectors DC for redundancy
• Maximum consumption energy: 12 W (for accessories 18 W)
• Podporuje PoE+ IEEE 802.3at/af a pasívne PoE 12-57 V
• Koové puzdro
• Without fan
You get such an active device with the basic functions of the switch with additional functions, eg. configuration VLAN
• mirror traffic
• limited width band
• adjustment of fields MAC a IP header
Installed SFP+ slots support module 1.25 GB SFP aj 10 GB SFP+.
Technical specifications:
Product code: CRS305-1G-4S+IN
CPU: 98DX3236A1 800 MHz
RAM: 512 MB
Type of storage: Flash
Size of storage: 16 MB
Model of chip switch: 98DX3236A1
Porty 10/100/1000 Ethernet: 1
SFP+ positions: 4
Operačný systém: SwOS / RouterOS (Dual boot)
PoE input: Áno
Supported input voltage: 12 - 57 V (DC konektor a PoE vstup)
Počet DC konektorov: 2
Rozmery: 141 x 115 x 28 mm
Prevádzková tempelácia: -40 °C .. +70 °C (testované)
Maximálna soprapa energie: 12 W
Level license ROS: 5
Upozornenie:
Výrobca MIKROTIK does not provide a warranty on the device škoštané prepätím.
The device is necessary to adequately protect against induced electrostatic prepätium or prepätővým spikés on the power supply.
For outdoor installations, it is necessary to use a tie-in cable (FTP/SFTP), appropriate surge protectors (if they are integrated) to ensure proper and effective grounding.