Non-contact thermometer for children

Non-contact infrared thermometer.
Technical data:

• Measurement range: 32.0°C~42.9°C


• Accuracy: ±0.3°C


• Minimum error: 0.1°C


• Automatic shut-off after one minute of non-use


• Memory: 10 measurements


• Battery: CR2032 3.0V (lithium battery)


• Number of measurements: 2500 times (after this many measurements, a new battery must be replaced)


• Certification: CE 0197, 93/42/EEC

Instructions for use:
1. Power on. Press the ON/RECALL button on the other side of the thermometer. After 1-2 seconds, you will hear a beep and many symbols will appear on the screen. Kai After 1-2 seconds, the symbols will go out and the numbers 0.00 C will remain on the screen, then you can measure the temperature.
2. Measurement. Bring the thermometer 1-3 cm away from the forehead and press the "scan" button on the front of the thermometer.
3. Readings. After 1-2 seconds, the numbers with your temperature will appear on the screen. If your temperature is correct - the screen will turn green, if it is slightly elevated - orange, and if you have a high fever - the screen will turn red.
4. Memory. By pressing the ON/RECALL button on the other side 2 times, you will see the letter M on the screen. Press the button again and it will show the previously measured temperature, 10-tą, by pressing it again the thermometer will show the temperature 9-tą, etc. In this way the thermometer will show 10 previously measured temperatures.