Interfejs kamery cofania Porsche PCM4.1, 5.0, 6.0

Porsche PCM4.1, 5.0, 6.0 Rear View Camera Interface

The interface adds a rearview camera to your car and displays the image on your original car radio (which must be pre-installed). Some adapters are plug-and-play solutions, while others require connecting cables or other modifications. Please read the installation instructions carefully beforehand or contact us with any questions. In addition to the adapter, you'll need a reversing camera. We also encourage you to check out our full range in the reversing camera section.

Video interface suitable for Porsche Panamera from 2017 with PCM 4.1 navigation, Porsche vehicles from 2018 with PCM 5.0 navigation, Porsche vehicles from 2022 with PCM 6.0 navigation. For a 12.3-inch monitor. For connecting any two video sources, a reversing camera and a front camera.

The video interface allows you to connect a rear view camera, an automatic front camera and two other video sources (e.g. USB player, DVB-T2 tuner, etc.) to the vehicle manufacturer's factory infotainment system.

Product features

• Video interface for factory infotainment systems
• 1 CVBS rear view camera video input
• 1 CVBS front camera video input
• 2 CVBS video inputs for upgrade devices (e.g. USB player, DVB-T2 tuner, ...)
• Automatic switching to the rear view camera input when reverse gear is engaged
• Automatic front camera switching when reverse gear is engaged for 10 seconds
• Distance lines for the rear view camera can be activated (not available for all vehicles)
• Possibility of activating PDC (not available for all vehicles)
• Activate video while driving (ONLY for network-connected video)
• NTSC compatible video inputs

Make and model:

• Porsche Panamera (971) 2017 ->
• Navigation: PCM 4.1 (Harman) with 12.3-inch monitor

• Porsche 911 (922) 2019 ->
• Porsche Cayenne E3 (PO536) 2018 ->
• Porsche Cayenne Coupe 2019 ->
• Porsche Macan 2019 ->
• Porsche Taycan 2019 ->
• PCM 5.0 (Alpine) with 12.3-inch monitor
• Porsche 911 (922) 2022 ->
• Navigation: PCM 6.0 (Aptiv/Deplphi) with 12.3-inch monitor

Limitations:

Video only- The interface does NOT transmit any audio signals. The existing factory AUX audio input or FM modulator can be used to power the audio signals. If two AV sources are connected, additional electronics are required for audio switching. Factory rear camera- Automatic shifting to RFK only as long as reverse gear is engaged. Additional electronics are required to delay downshifting. Front camera available on the aftermarket- Switching to the front camera occurs automatically after disengaging reverse gear for 10 seconds. Manual switching to the front camera is also possible using the button. Distance lines and PDC- Distance line display and optical PDC display do not work on all vehicles. Video input signal- Only NTSC video sources compatible.

Connections:

• Image input: 4-pin HSD
• Electricity: Open Cable Ends
• CAN bus: Plug Play (using Quadlock)
• Video inputs (2x): RCA sockets
• Rear view camera input: RCA socket
• Front camera input: RCA jack

Technical data

• Operating voltage 7 ~ 25 V DC
• Quiescent current 8mA
• Current consumption 340 mA at 12 V
• Video input 0.7 ~ 1V
• NTSC Video Input Formats
• Operating temperature range -40°C to +85°C
• Video box dimensions 117 x 25 x 103 mm (W x H x D)

Legal notice While driving, do not distract the driver, directly or indirectly, with moving images. This is prohibited by law in most countries/states. Besides being used when the vehicle is stationary, this product is intended solely for displaying standby menus (e.g., MP3 menus from DVD players) or rearview camera images while driving.