Porsche PCM4.1, 5.0, 6.0 reversing camera interface

Porsche reversing camera interface PCM4.1, 5.0, 6.0 The interface retrofits the car with a reversing camera and displays the image on the original car radio (which must be prepared for this). Some adapters are plug and play solutions, others require splicing cables or other modifications. Please read the assembly instructions in advance or contact us if you have any questions. In addition to the adapter, you need a reversing camera. We also encourage you to familiarize yourself with our full offer in the reversing camera tab. Video interface suitable for Porsche Panamera from 2017 with PCM 4.1 navigation, Porsche vehicles from 2018 with PCM 5.0 navigation, Porsche vehicles from 2022 with PCM 6.0 navigation. For a 12.3 inch monitor. For connecting any two video sources, a reversing camera and a front camera. The video interface allows you to connect a reversing camera, an automatic front camera and two other video sources (e.g. USB player, DVB-T2 tuner, etc.) to the vehicle manufacturer's factory infotainment system. Product FeaturesVideo interface for factory infotainment systems1 CVBS rearview camera video input1 CVBS front camera video input2 CVBS video inputs for retrofit devices (e.g. USB player, DVB-T2 tuner, ...)Automatic switching to rearview camera input when gear is engaged reverseAutomatic front camera switching after engaging reverse gear for 10 secondsDistance lines for the rearview camera can be activated (not available for all vehicles)Possible to activate PDC (not available for all vehicles)Image activation while driving (ONLY for networked video)NVideo inputs compatible with NTSC Brand and model:Porsche Panamera (971) 2017 ->Navigation: PCM 4.1 (Harman) with 12.3 inch monitorPorsche 911 (922) 2019 ->Porsche Cayenne E3 (PO536) 2018 ->Porsche Cayenne Coupe 2019 ->Porsche Macan 2019 - >Porsche Taycan 2019 ->PCM 5.0 (Alpine) with 12.3 inch monitor Porsche 911 (922) 2022 ->Navigation: PCM 6.0 (Aptiv/Deplphi) with 12.3 inch monitor Limitations: Video only -  The interface DOES NOT transmit any audio signals . The existing factory AUX audio input or FM modulator can be used to power audio signals. If 2 AV sources are connected, additional electronics are required to switch audio.Factory Rear View Camera  -  Automatic switch to RFK only as long as reverse gear is engaged. Additional electronics are required to delay downshifts.Aftermarket Front Camera  -  Switching to the front camera occurs automatically when reverse gear is disengaged for 10 seconds. It is also possible to manually switch to the front camera using the button.Distance lines and PDC  -  Distance line display and optical PDC display do not work on all vehicles.Video input signal  -  NTSC video sources only compatible.Connections:Image input: 4-pin HSDElectricity: open cable endsCAN bus: Plug & Play (using Quadlock)Video inputs (2x): Cinch socketsRear camera input: RCA socketFront camera input: RC socket Technical dataOperating voltage    7 ~ 25V DC Quiescent current    8mA Current consumption    340mA at 12VVideo input    0.7 ~ 1VVideo input formats    NTSCOperating temperature range    -40°C to +85°CVideo box dimensions    117 x 25 x 103 mm (W x H x D)Legal noticeDuring driving, the driver must not be distracted, directly or indirectly, by moving images. In most countries/states this is prohibited by law. Apart from the fact that this product is used when stationary, it is only intended for displaying standing menus (e.g. MP3 menus from DVD players) or images from a reversing camera while driving.