Interfejs kamery Citroena NAC 9 lub 12 cali

The interface adds a rearview camera to your car and displays the image on your original car radio (which must be pre-installed). Some adapters are plug-and-play solutions, while others require connecting cables or other modifications. Please read the installation instructions carefully beforehand or contact us with any questions. In addition to the adapter, you'll need a reversing camera. We also encourage you to check out our full range in the reversing camera section.

The video interface allows you to connect a rear view camera, automatic front camera and other video sources (e.g. USB player, DVB-T2 tuner, ...) to the vehicle manufacturer's factory infotainment system.

Characteristics

• 1 composite video input for rear view camera
• 1 CVBS front camera video input
• 1 FBAS video input for upgradeable devices (e.g. USB player, DVB-T2 tuner, ...)
• Automatic switching to rear view camera input when reverse gear is engaged;
• Automatically switches to the front camera when reverse gear is disengaged for 10 seconds
• Activate image while driving (ONLY for entered video)
• NTSC compatible video input

Make and model:

• Citroen C3 Aircross 06/2021 ->

Navigation: NAC with 9-inch touchscreen monitor

• Citroen C5X from 02/2022
• Citroen DS7 Crossback from 03/2017
• Citroen DS9 from 11.2020

Navigation: NAC or DS Connect Radio/Nav with 12-inch touchscreen monitor Limitations Videos only - The interface does NOT transmit any audio signals. You can use the factory AUX audio input or an FM modulator to transmit audio signals.

Factory Backup Camera - Automatic switching to the factory backup camera is only possible when reverse gear is engaged (switching cannot be delayed). Automatic switching to the factory backup camera does not work from the video mode of a video source connected to the interface's video input.

Aftermarket Front Camera - Switches to the front camera automatically after disengaging reverse gear for 10 seconds. Manual switching to the front camera is not possible.

Video Input Signal - Only compatible with NTSC video source.

Inputs:

• Image input: 4-pin HSD
• Power and CAN bus: open cable ends (power) and Plug Play (depending on vehicle, CAN)
• Rear view camera input: RCA socket
• Front camera input: RCA jack
• Video input: RCA jack

Technical specifications:

• Operating voltage 12VDC (9~16V)
• Quiescent current 5mA
• Power consumption 190mA
• NTSC Video Input Formats
• Operating temperature -20°C to +70°C
• Video box dimensions 122x83x26mm (W x H x D)

Legal notice The driver must not be distracted directly or indirectly by moving images while driving. This is prohibited by law in most countries/states. Other than operation when stationary, this product is only intended to display menus in a standing position (e.g., MP3 menus from DVD players) or rearview camera images while driving.