Interfejs do kamery cofania VW, Seat z MIB2 Entry 6,5". (bez dźwięku)

Adapter for VW, Seat reversing camera with MIB2 Entry 6.5 - take care of your car's equipment today!

Maintaining the proper distance behind the car is particularly difficult when reversing. Due to the size of the car, we can feel the effects if we hit an object behind it while parking. However, avoiding this problem is much simpler than it seems. The VW and Seat MIB2 Entry 6.5 rearview camera adapter allows us to connect the camera to the factory-installed radio, allowing us to retain the original equipment.

The interface adds a rearview camera to your car and displays the image on your original car radio (which must be pre-installed). Some adapters are plug-and-play solutions, while others require connecting cables or other modifications. Please read the installation instructions carefully beforehand or contact us with any questions. In addition to the adapter, you'll need a reversing camera. We also encourage you to check out our full range in the reversing camera section.

Video interface for a rearview camera, a front camera with automatic function, and two other video sources. Suitable for VW, Seat with MIB2 Entry 6.5. For connecting any two video sources and a rearview camera.

Product features:

• Video input for factory infotainment systems
• 1 rear view camera video input
• 2 FBAS video inputs for upgraded devices (e.g. USB player, DVB-T2 tuner, ...)
• Automatic switching to rear view camera input when reverse gear is engaged;
• Activate image while driving (ONLY for entered video)
• Activating the distance line for the rear view camera
• Compatible with factory rear view camera
• NTSC compatible video inputs

Compatibility with VAG vehicles with MIB STD2 PQ/+Nav with 6.5 inch monitor, one SD slot vertically on the left side or one SD slot vertically on the left/right side and CD drive above the monitor.

Installed in the following Skoda and VW vehicles with MIB2 Entry 6.5"

Make and model:

• MAN TGE (based on VW Crafter) from 04.2017
• Navigation: MIB2 GP Composition Color 6.5 inch in one head unit
• Seat Arona (KJ7) years 2017-2021,
• Seat Ateca (KH7) from 04.2016 to model year 2020,
• Seat Ibiza (KJ) from 06.2017 to model year 2021,
• Seat Leon 3 (5F) years 2018-2019,
• Seat Toledo 4 (KG) model years from 2018
• Navigation: MIB2 GP Media System Touch Color 6.5inch monitor
• Skoda Fabia 3 (NJ) models from 2018,
• Skoda Kamiq (NW4) from 06.2019,
• Skoda Octavia 3 (5E) models from 2018,
• Skoda Rapid (NH1) models from 2018,
• SkodaSuperb 3 (3V) from 2018r
• Navigation: MIB2 GP, Radio Swing 6.5-inch color monitor and SD card slot without CD drive
• VW Crafter (SZ/SY) year 2017,
• VW Golf 7 (5Q) year 2018,
• VW Golf 7 Sportsvan 2018-2020,
• VW Passat (B8) models from 2018,
• VW Polo 6 (AW1) models from 2018,
• VW T-Cross (C1) from 04.2019,
• VW T-Roc (A11) models from 2018,
• VW Taigo (CS) from 09/2021,
• VW Tiguan (AD1) models from 2018,
• VW Touran (ST) models from 2018,
• VW Transporter T6.1 (SH) from 10.2019
• Navigation: MIB2 GP Composition Color 6.5 inch in one head unit
• Limitations:
• Video only: The interface ONLY transmits video signals to the infotainment system. The factory AUX audio input or FM modulator can be used to transmit audio signals. If 2 AV sources are connected, the CAB-FV-AUDIO audio cable is optionally available for audio switching.
• Factory reversing camera:automatic switching to RVC only when reverse gear is engaged. Additional electronics are required to delay downshifts.
• The interface is mounted on the monitor board (to do this, you must open the monitor!).

Wiring:

• Image input: 10-pin HSD
• Elek