Interface for connecting a reversing camera for VW, Skoda, Seat RNS510, Columbus, Trinax

Interface for connecting a VW, Skoda, Seat RNS510, Columbus, Trinax reversing camera. The interface allows you to connect an external NTSC reversing camera and automatically switch on the image on the display when reverse gear is used. This undoubtedly makes driving a vehicle easier on a daily basis, especially for people who are just starting their adventure with driving and, for example, older people. Reduces subconscious stress caused by increased concentration on the road. The interface has a factory TV tuner, which cannot be installed, and is only compatible with NTSC cameras. Its coding is based on a diagnostic computer that includes an automatic image from the rear camera. What you should know? This Interface is compatible with VW, Skoda and Seat with RNS510, Columbus, Trinax (all min. B software version SW1100) or RNS810 navigation system. It is perfect for vehicles without a factory rear camera. If you have any questions or doubts about the product, please contact us. DescriptionThe interface allows you to connect an external NTSC reversing camera, automatically switching on the image when reverse gear is engaged. Factory TV tuner: must not be installed. Only compatible with NTSC cameras. Coding: the radio player is coded by the diagnostic computer to switch on the automatic image from the rear camera. Connectors 1xVideo. Supported car models. Compatible with VW, Skoda and Seat with RNS510, Columbus and Trinax (all with at least Version B of SW1100), RNS315 and RNS810 navigation systems. RCD510 and Bolero radio. With 26-pin connector on the back. For vehicles without factory rear camera. Supported Columbus,Trinax,RNS510 navigation models