Infoadapter opel insignia, astra j, corsa, adam, mokka 2008 - ctuvx01

Opel Infodapter The Infodapter will retain several vehicle display functions after replacing the factory radio or navigation system. Vehicle-specific settings are available and will be displayed on the newly installed radio. The SWC buttons are necessary to access the Infodapter's configuration menu. Not all functions will be retained, such as power assist trailer, E-Call etc.Check OEM HU and vehicle settings for available settings before installation.Check all functions before final installation.Also check our listed OEM head units and compare the wiring harness connectors shown with the connectors in your car and make sure they match optically and technically. Note: CAN bus Connection: 48-pin Opel plug Connection: OEM camera > Cinch(m) yellow Visualize menu settings > connect purple/white reverse gear output Visualize menu settings > connect Cinch(m) yellow to the reversing camera input and configure Settings vehicle and vehicle information > rear view camera input reflected on retrofit monitor Vehicles with OEM color monitor > color monitor without functions Vehicles without OEM sound system Depending on OEM vehicle equipment and software:Not all vehicle settings are supportedNot all vehicle functions are supportedNot all information vehicle information are shown No outside temperature display No date display No time display Brand and model: Opel Adam (MA) 2013 - 201 Opel Astra J (PJ) 2010 - 2016 Opel Corsa (E) 2014 - 2016 Opel Insignia (OG-A) 2008 - 2013 Opel Mokka 2012 - 2016 Opel Meriva 2010 - 2017Opel Zafira Tourer 2011 - 2016The following signals are transmitted:IgnitionIlluminationReverseSpeedpulseParkingbreakVisualizationSWCVisualization of air conditioningVisualization OPSVehicle settings