Infoadapter land rover evoque 2011-2013 ctulr03

The Infodapter will retain several functions of the vehicle's display after replacing the original radio or navigation system. Vehicle specific settings are available and will be displayed on the aftermarket head unit. Check the OEM HU and vehicle settings for available settings before installation. Check all functions before final installation. Also check our listed OEM head units and compare the wiring harness connectors shown with those in your vehicle and make sure they match optically and technically. The SWC buttons are necessary to access the Infodapter configuration menu. Not all functions will be retained, such as trailer assist, E-Call etc. Note: Vehicles with SWC connector: 14 Pin / 18 Pin / 12 Pin Land Rover connector: MOST > RCA(m) Red/White connector: MOST loop > OEM display to enter settings > connect the turn signal output (purple/white) to the HU for visualization settings > connect and configure the HU reversing camera input Connect the PDC switch Vehicles with most enhanced OEM systems vehicles with rear PDC without front PDC after installation > Can BUS must be disabled vehicles with different equipment or software package may not be compatible date/time settings supported PDC visualization supported Rear PDC bells supported vehicle settings not supportedMake and model:xa0xa0 Land Rover Range Rover Evoque (L538) 09/ 2011 - 2013 xa0Note :xa0xa0CHOOSE THE RADIO CABLE YOU WANT TO INSTALL (PURCHASE SEPARATELY) ALPINE BLAUPUNKTxa0 BLAUPUNKT NEW YORK / xa0SONY CLARION JVC JVC KW-AVX KENWOOD NAKAMICHI / PHILIPS LG PANASONIC PANASONIC AV PARROT ASTEROID SMART PIONEER PIONEER AV ZENEC UNIVERSAL FORxa0CHINESExa0RADIOSFeatures Benefits Allows you to upgrade to an aftermarket head unit while retaining the factory steering wheel controls Infodapter menu settings are controlled and changed via the vehicle's original steering wheel controls Safety: Allows you to keep your hands on the wheel and your eyes on the road. Plug and play, no wire cutting required Retains original parking sensor sound when fitting an aftermarket head unit; Retains the factory USB input Infodapter allows you to display vehicle information on any aftermarket AV head unit. Select the correct head unit connection cable according to the brand of aftermarket head unit you wish to fit; Please check that the connections in your vehicle match the harness you have purchased!