Industrial 4G/ LTE router

Industrial 4G/LTE router.

Features:

• The industrial LTE router is designed to transmit data wirelessly over mobile networks 4G LTE CAT4 / 3G.
• NXP industrial grade processor.
• Has an integrated cellular modem and SIM card function.
• Extremely low energy consumption: from 1.9W in normal mode to max. 2.4W.
• The router supports a wide operating temperature from -40°C to +70°C. Solid body.

Technical data:

• Supply voltage: 9-48V DC.
• Power consumption: 1.9W (in normal mode), max. 2.4W.
• Operating temperature: -40~+70 °C.
• Operating humidity: 0-95%RH non-condensing.
• Size: 180x90x26 mm.
• Safety class: IP30.
• Case material: metal.
• Installation: desktop/ wall/ on DIN rail.
• Weight: 271g.

Hardware:

• CPU: 528MHz, ARM Cortex-A7.
• Operative memory RAM: 128Mb DDR3.
• Flash memory: 128 Mb.
• SIM card slot: 1x Mini SIM-2FF.
• Reset button: 1x RST.
• LED indicator: 1x power, 1x system, 1x SIM, 3x signal strength.
• Install: watchdog, timer.
• Antenna: 1x50 ohm SMA connector.

Software:

• Network protocols: IPv4/IPv6, PPP, PPPoE, SNMP v1/v2c/v3, TCP, UDP, DHCP, RIPv1/v2,
• OSPF, DDNS, VRRP, HTTP, HTTPS, DNS, ARP, QOS, SNTP, Telnet, VLAN,
• SSH etc.
• VPN: DMVPN, IPsec, OpenVPN, PPTP, L2TP, GRE.
• Security: Access Control, DMZ, Port Mapping, MAC Binding, SPI Firewalls,
• DoS&DDoS Protection, Filtering (IP&Domain), IP Passthrough.
• Management: Web, CLI, SMS, On-demand dial up, SNMP v1/v2/v3, DeviceHub (device center).

Ethernet:

• Ports: 1x WAN/LAN + 1x LAN.
• Data transfer rate: 10Mbps / 100Mbps (IEEE 802.3).
• Security: WPA/WPA2 authentication, WEP/TKIP/AES encryption.