ICOM IC-R6
Product reference: 306

ICOM IC-R6

Product reference: 306
You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
25000
Product in warehouse

Guarantee
24 month

Delivery in 
2 - 3
business days

Your message has been successfully sent!
Fill in the required fields*

( Ordered product, delivery in 9 days )

100 channels per second broadband signal search engine

100kHz-1309.995MHz band scan

Although the IC-R6 scanner can scan in a very wide frequency range, its receiver provides excellent sensitivity and other receiver characteristics. You will be able to scan amateur radio frequencies, commercial frequencies, AM, FM, shortwave frequencies, TV, and frequencies broadcast by other devices.

100 channels per second high-speed scanning

The IC-R6 scans 100 channels per second at high speed. This is the highest scanning speed with the highest search efficiency over the entire 1300 MHz spectrum.

15 hours of continuous work

The IC-R6 is energy efficient, designed to scan for hours on a single charge. With rechargeable Ni-MH batteries (1400mAh × 2), the IC-R6 can work up to 15 hours continuously.

1300 memory channels with 22 memory banks

With 1300 alphanumeric memory channels, 50 scan lines and 200 automatic channel recording, the IC-R6 gives you the flexibility to work with frequency scanning. Use the "Bank link" function to select or connect any of the 22 memory banks.

VSC (Voice Squelch Control)

VSC only opens when a modulated signal is present and ignores noise. This is a handy feature for those listeners who are looking for chat, news and music rather than data traffic or beacons.

Multiple power options

The IC-R6 can be powered by rechargeable Ni-MH batteries or alkaline batteries. An external power source CP-18A/E can also be used to power the IC-R6.

Other functions

Built-in audio low pass filter
±1.0ppm high frequency stability (at 25°C)
Earphone cord antenna for AM aviation as well as FM broadcast
Ferrite bar antenna for AM broadcast
150mW loud audio with internal speaker
DTCS and CTCSS tone squelch and reverse tone squelch
Priority watch function with priority beep function
Optional CT-17, CI-V level converter for remote control
PC programmable with optional CS-R6
Receiver-to-receiver cloning (optional OPC-474 required)
Auto power OFF (0.5–2 hours and end of busy signal)
Compact, drip-resistant construction
Duplex operation monitoring
Automatic LCD backlight
Dial speed acceleration
Built-in RF attenuator
Auto memory write scan stores the detected frequency, mode and tone into a specified memory
Reversible up/down buttons and dial knob for volume, frequency, memory channel, scan direction and set mode settings
Optional new tube earphone, SP-27
Weather channel receive with weather alert

Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial