Heating cable 750W, 62.5m, 12W/m, AC 230V

Electric floor heating cable, AC 230V, 12W/m power, two-core, 3.6mm thickness, cold lead length 2.5m, FEP+PVC, 62.5m length, thermal output 750W Features: Thin, constant power electric floor heating cable is designed for comfortable heat distribution in rooms. With a diameter of just 3.6 mm, the flexible cable is ideal for renovations and rooms with complex shapes where it is important to maintain a minimum floor height. Suitable for use under a variety of floor coverings, including tiles, laminate and parquet or marble floors. The solid heating core ensures even temperature distribution along the entire length of the cable, precise power maintenance (12 W/m) and reduces the risk of overheating or uneven heating. It features a two-core structure that makes installation easier and faster (no need to return the cable to its starting point). This is especially convenient in difficult areas or confined spaces (e.g. bathrooms, near walls). The internal insulation made of FEP fluoropolymer guarantees high temperature resistance and durability, while the outer PVC sheath protects against mechanical damage. The integrated aluminum shield reduces electromagnetic interference and ensures safe use in residential areas. Moisture resistance allows the cable to be used in bathrooms and other wet rooms. High-quality materials guarantee long-term reliability, safety and electromagnetic stability. The electric underfloor heating cable is controlled by a thermostat, which ensures optimal energy use and protects the floor from overheating. The length of the electric floor heating cable is selected based on the required amount of heat (W/m²) and the laying density. In standard rooms, the optimal coil spacing is about 12 cm. To calculate the required cable length, the active (heated) floor area is divided by the selected coil spacing in meters - the result obtained shows the approximate cable length in meters. For example, if the heated floor area is 6 m² and the coil spacing is 12 cm (0.12 m), the required cable length will be 6 ÷ 0.12 = 50 meters. The cable is designed for underfloor heating in both new construction and renovated premises. Due to its thin profile and double-core structure, the cable is easily installed in an adhesive or screed layer under tiles, stone or PVC. Suitable for residential and commercial premises, kitchens, corridors, as well as bathrooms and other wet areas. Note:The photo is illustrative, product dimensions (cable length, wire size) depend on the specific option selected. Technical data: Purpose: floor heating. Type: constant power heating cable. Heating power: 12 W/m ±10%. Operating voltage: AC 230V. Cable diameter: 3.6mm. Cable length: 62.5m. Total power: 750 W. Resistance: 70.53 Ohm. Resistance tolerance: +10% / -5%. Cable structure: two-core. Insulation: FEP (fluoropolymer). Outer sheath: PVC. Shielding: aluminum-plastic tape. Short circuit protection: yes. Cold lead: 2.5 m long. Conductor: single core. Connector: external connection point. Protection class: IP68. Certificates: CE, EAC, TUV, CSA. Warranty:25 years.