Headrest backrest cushion leather for car amio-02559

COMFORTABLE HEAD REST FOR CAR HEADREST BLACK COLOR HIGHEST QUALITY MATERIAL MOUNTED ON HEADREST BARS IN A UNIVERSAL SIZE - IDEAL FOR BOTH ADULTS AND CHILDREN xa0 High-quality practical backrest designed for mounting on headrest bars in a car: xa0 significantly increases the comfort of travel, including very long ones in a universal size ideal for both adults and children very easy to install and use later xa0 DIMENSIONS: spacing between cushions: 14.5 - 26.5 cm (each headrest can be extended and pushed together independently) dimensions of a single cushion: 19 x 11 x 3 cm (height x width x thickness) dimensions of the mounting strip: 26 x 8.5 x 3.2 cm (width x length x thickness)adapter diameters: 9, 11, 13 mm (2 adapters of each type)possibility of mounting without adapters on bars with a max. diameter of 15 mmFIT:The backrest is compatible with headrest bars with a maximum diameter of 15 mm (then it must be mounted without adapters) and with a spacing between them of 7 to 16 cm (measured from the centers of the bars).xa0xa0xa0It definitely increases the comfort of journeys, including long ones - just set the needed width and comfortably rest your head on the pillows. You no longer have to lean on the belts, the glass or put yourself in a strange position. No more sore necks ;)xa0Made of soft, pleasant to the touch material.xa0Universal - it is an ideal solution for both short and long journeys, for both adults and children.xa0Very simple and intuitive installation - it is attached to the car headrest bars. Fits both the front and rear seats of the vehicle (of course, provided that the headrests are not integrated with the seat).xa0Adjustable width between the cushions and their angle - the cushions can be adjusted independently of each other, so everyone can adjust them perfectly to their needs.xa0Easy to clean - if they get dirty, just wipe them with a damp cloth. If the dirt is larger or more stubborn, you can remove the top layer from the cushions (thanks to the practical Velcro on the back) and scrub it thoroughly and conveniently.xa0INSTALLATION:Select adapters that match the thickness of the rods in the headrest and insert them into the holes corresponding to the spacing of the rods.Place the rear strip and screw it in place using three screws (included - visible in the photo).Spread the headrests to the required width and set the appropriate angle.INCLUDED:black travel backrest with fabric finish2x 9 mm adapter2x 11 mm adapter2x 13 mm adapterThe whole is packed in the original box.