Car GPS tracking device to OBD connector with diagnostics

Compact and reliable car GPS tracking device for OBDII connection. Simple and easy to connect, does not require any additional installations. The device supports GPS and BDS satellite positioning, reads car diagnostic data via OBD interface and can analyze driving behavior.
Features:
This is a compact and easy-to-install GPS tracking device for corporate vehicles, private cars or usage-based insurance solutions. The tracker uses GNSS positioning (GPS and BeiDou), which allows you to accurately determine the location of the vehicle and monitor its movement in real time.
Through the OBD interface, it can read key car diagnostic data and monitor vehicle status, while integrated alerts help you respond quickly to important events such as speeding, power outages, or leaving a designated area.
One of the most important features of the VG502 is Driving Behavior Analysis (DBA), based on the UBI algorithm, which allows you to recognize four types of dangerous driving behavior, such as sudden acceleration, sudden braking, sharp turns or potential collisions.
The integrated Bluetooth BLE 4.0 module allows you to expand functionality using additional sensors or accessories.
The device does not require additional installation work, therefore it is a reliable and universal solution for both private use and professional transport monitoring.
The tracker requires a SIM card with internet data. The SIM card is purchased separately.
Features:
Accurate location determination based on GPS+BDS+LBS.
Disconnection alarm.
Ignition (ACC) detection based on supply voltage.
Overspeed alarm.
Virtual fence (Geo-fence, Geo fence).
OBD diagnostic data reading.
Driving behavior analysis (sudden acceleration, braking, turns).
Bluetooth BLE 4.0 support.
GSM card is not included.
Technical data:
GSM frequency: 850/900/1800/1900 MHz.
Frequency bands: B2 / B3 / B5 / B8.
GPRS: TCP/IP.
Memory: 4+4Mb.
GNSS system: GPS/BDS.
Frequency: L1.
Positioning accuracy: <2.5m CEP.
Tracking sensitivity: -162dBm.
Minimum signal level required to reach the set point during cold start: -148dBm.
Time to first fix (TTFF):
Coordinate acquisition time when time and last location coordinate are known (hot start) <1 sec.
Coordinate acquisition time when the initial coordinate and time are not known (cold start) <32 sec.
Integrated GNSS antenna.
Battery: 50mAh/3.7v lithium polymer battery.
Operating voltage: 9-36VDC.
Connector: standard OBD II computer diagnostic car connector (found in all cars).
OBD protocols: ISO9141-2, ISO14230-4 (KWP), ISO15765-4 (CAN).
Interfaces: CAN Bus, K-Line.
Supported SIM card: nano-SIM.
LED indicator: status (blue).
Sensor: accelerometer.
Operating temperature: -20C~ +70C.
Humidity: 5~95%RH (non-condensing).
Size: 61 x 52 x 26 mm.
Weight: 55g.
Compatible and tested with the Tracksolid.com operating platform on Windows, Android, iOS systems.
The app allows you to configure the device and monitor all collected information - location, time, status, etc.
Importer: Eurodigital.
Warranty: 24 months.
https://www.youtube.com/watch?v=9V6nbWXy9bQt=60s