GP-1 bc powder fire extinguisher with hanger

A powder car fire extinguisher designed for passenger vehicles is the basic protection for your car in the event of a fire. The low weight of the car fire extinguisher (1.6 kg), the use of a powdered extinguishing agent (1 kg BC powder) and the simplicity of operation enable the device to be used by adults without special training. The set includes: ? Powder fire extinguisher (1 kg). ? Plastic hanger. The fire extinguisher has a 5-year warranty. MOST IMPORTANT INFORMATION Easy and ergonomic to use. Fast and effective in extinguishing. Economical  to maintain and service. The valve design allows for temporary interruption of extinguishing. The fire extinguisher tank is not subject to UDT inspection tests. Refillable. The fire extinguisher tank is covered with UV-resistant polyester paint. GP-1 BC powder fire extinguisher with hanger Letter designations of extinguishing agents used in Europe: B - for extinguishing fires of liquids and solids that melt when burning, e.g. gasoline, polyethylene, tar, C - for extinguishing flammable gas fires, e.g. methane, acetylene, propane. TECHNICAL DATA Extinguishing effectiveness: 21B C Weight of extinguishing agent: 1 kg Working medium: 12g CO2 Action time: min. 6 s Test pressure: 25 bar Application temperature range: -20 °C / +60 °C Total weight: ~1.6 kg Max. voltage of the extinguished device: 1000 V Total height: 254 mm Tank diameter: 86 mm Produced by the leader portable fire extinguishing equipment industry in Poland, OGNIOCHRON S.A. Authorized service points in Poland. Produced in accordance with the requirements of the domestic and EU market based on the certified ISO 9001 quality system. QUALITY AND SAFETY Produced in accordance with the requirements of the domestic and EU market based on the certified ISO 9001 quality system. Meets the requirements of the European standard EN3 and the PED Safety Directive 2014/68/ EU. The first inspection should be performed two years from the production date, and each subsequent inspection should be performed at least once every 12 months. The fire extinguisher has a 5-year warranty. How to use 1. Tear out the safety pin. This will unlock the fire extinguisher. 2. Point the nozzle at the fire source. Do not aim at the flames. 3. Press the trigger  to release the extinguishing agent. 4. Sweep the source of the fire with a jet of extinguishing agent until the fire is extinguished. Hold the fire extinguisher vertically.