Ford sony sync 3 video interface

The video interface allows you to connect a rear view camera, an automatic front camera and any two video sources (e.g. USB player, DVB-T2 tuner, ...) to the vehicle manufacturer's factory infotainment system.Product features Video feeder for factory infotainment systems 1 composite video input from the rear view camera 1 CVBS front camera video input 2 FBAS video inputs for retrofit devices (e.g. USB player, DVB-T2 tuner, ...) Automatic switching to the rear view camera input when reverse gear is engaged Automatic switching of the front camera after reverse gear for 10 seconds Possibility to activate the distance line for the rear view camera (not available for all vehicles) Possibility to activate PDC (not available for all vehicles) Activation of the image while driving (ONLY for video signal) NTSC compatible video inputsCompatibilityManufacturer : FordModel :xa0 C-Max from model year 2018 Ecosport from model year 2017 Fiesta from model year 2018 model year from 07/2017 Focus from model year 2017 Galaxy from model year 2016 Kuga from model year 2018 Mondeo from approximately 2017 Mustang from model year 2017 Puma Ranger from model year 2017 S-Max from model year 2016 Tourneo Connect Tourneo Custom Transit Custom from Facelift 2018 and other vehiclesxa0Navigation : Full version Sync3 with APIM and 7-inch or 8-inch tablet and non-tablet monitorLimitations :xa0 Videos only The interface ONLY passes video signals to the infotainment system. The existing factory AUX audio input or FM modulator can be used to feed in audio signals. If 2 AV sources are connected, additional electronics are required for audio switching. Factory reversing camera Automatic switching to RFK only as long as reverse gear is engaged. To delay downshifting, additional electronics are required. Aftermarket front camera Switching to the front camera occurs automatically after disengaging reverse gear for 10 seconds. Manual switching to the front camera is also possible using the button. Distance lines and PDC Distance line display and optical PDC display do not work on all vehicles. Video input signal Only compatible with NTSC video sources. Technical specifications Operating voltage 7~25VDC Quiescent current <10mA Power consumption 200mA at 12V Video input 0.7 ~ 1 V Video input formats NTSC Operating temperature range -40°C to +85°C Dimensions : Video box 118 x 25 x 104 mm (W x H x D)