Navilock NL-8022MU USB-A GNSS receiver, u-blox 8, 4.5 m cable, IPX7, white (62532)
Product reference: 11-4043619625321

USB 2.0 GNSS receiver with an integrated antenna, u-blox 8 chipset and approximately 4.5 m cable. Its white mounting housing with IPX7 protection is designed for use with a computer and suitable navigation software. Manufacturer code: 62532; EAN: 4043619625321.

Navilock NL-8022MU USB-A GNSS receiver, u-blox 8, 4.5 m cable, IPX7, white (62532)

Product reference: 11-4043619625321

USB 2.0 GNSS receiver with an integrated antenna, u-blox 8 chipset and approximately 4.5 m cable. Its white mounting housing with IPX7 protection is designed for use with a computer and suitable navigation software. Manufacturer code: 62532; EAN: 4043619625321.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
154,42 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
10 - 15
business days

Your message has been successfully sent!
Fill in the required fields*

Navilock NL-8022MU – USB GNSS receiver for computer navigation

The Navilock NL-8022MU is an external satellite navigation receiver with an integrated antenna and u-blox 8 UBX-M8030-KT chipset. Connected to a computer, it supplies position data to suitable navigation software. The manufacturer confirms model code 62532 and EAN 4043619625321.

Navilock NL-8022MU – USB GNSS receiver for computer navigation

Installation on a boat, camper or bus

The white housing is designed to blend into white vehicle surfaces. A threaded mounting section and the supplied stainless steel nut and washer enable fixed installation. The approximately 4.5 m cable provides flexibility when positioning the receiver while keeping the computer inside the vehicle. IPX7 protection and an operating temperature of −20 to +60 °C support outdoor use in accordance with the manufacturer's instructions.

Support for multiple satellite systems

The receiver supports GPS, GLONASS, BeiDou, Galileo and QZSS signals and can receive signals from up to 72 satellites simultaneously. AssistNow assistance data is supported online and offline. SBAS augmentation systems help refine positioning: the manufacturer specifies 2.5 m CEP accuracy, or 2 m CEP with SBAS. These figures are not a guaranteed maximum error under all conditions.

Position updates reach up to 18 Hz in single-GNSS mode and up to 10 Hz in multi-GNSS mode. Frequent updates are useful for displaying the position of a moving vehicle. Cold start takes approximately 26 seconds, while hot start takes approximately 1 second.

Connection and important limitations

The USB-A connection carries data and supplies 5 V power. NMEA 0183 messages deliver navigation data to software supporting these messages. The manufacturer also specifies support for the 32-bit GNSS location API within Microsoft Sensor and Location Platform.

  • Listed operating systems: Windows Vista, 7, 8, 8.1, 10 and Linux Kernel 2.6.
  • A computer with an available USB-A port and suitable navigation software is required.
  • For OTG use, the manufacturer specifies Windows 10, a device with OTG functionality and an additional OTG adapter.
  • Galileo support requires firmware version 3.01 or later and appropriate configuration; the manufacturer specifies NMEA 0183 version 4.1.
  • This is an external receiver requiring a computer and software for navigation.

Technical specifications

ParameterValue
Model / manufacturer code NL-8022MU / 62532
EAN 4043619625321
Connector USB 2.0 Type-A male
Processor / chipset u-blox 8 UBX-M8030-KT
Signal bands GPS L1, GLONASS L1, BeiDou B1, Galileo E1, QZSS L1
NMEA 0183 messages GGA, GSA, GSV, RMC, VTG
Data transfer rate Automatic, up to 115200 bps
Sensitivity Down to −167 dBm
Power supply / current consumption 5 V DC / up to 45 mA
Length Approximately 4.5 m
Dimensions as specified Approximately 62 mm diameter × 21 mm height, excluding thread
Colours White housing, black cable
Protection / operating temperature IPX7 / −20 to +60 °C

Package contents

  • USB 2.0 GNSS receiver.
  • Stainless steel mounting nut and washer.
  • Navilock support CD with driver and user manual.
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial