Wallbox charging station - Pulsar Max 22kW

Wallbox Pulsar Max 22 kW - Compact and smart electric vehicle charging station with integrated 5 m Type 2 cable. Supports up to 22 kW of power, has Wi-Fi, Bluetooth connectivity and is controlled via the "MyWallbox" app. Resistant to environmental influences (IP54), compatible with OCPP and eligible for state support.

T TECHNICAL DATA

Net weight 4.91 kg
Operating temperature -25°C to +40°C

The charging station is intended to receive state support under the state support for natural and legal persons.

The charging station can be fully controlled via the "MyWallbox" app (photos attached)

Pulsar Plus Electric Vehicle charger, 5 meter cable Type 2, 22 kW, RCD(DC Leakage) + OCPP

Charging power 22 kW
IP class IP54
Activation myWallbox App
Connection type Type 2
Wireless connectivity Wi-Fi, Bluetooth
Charging protocol OCPP

LOGISTICS INFORMATION

Package depth (mm) 390.00 mm
Package height (mm) 200.00 mm
Gross weight 5.40 kg
Package width (mm) 390.00 mm

Integrated battery No
WEEE classification
CL109:6:2017-04-01

Product warranty: 3 years

Integrated energy metering: Yes

Dynamic Power Management: Yes, Required Carlo Gavazzi EM340

RFID: No

Solar charging: Yes, Required Carlo Gavazzi EM340

Support: Meets ENA requirements

Dynamic power controller (which is necessary to install in order to receive the current state support) + 200 Eur

Wallbox Pulsar Plus is one of the smallest but very powerful electric cars charging station on the market. Its design is adapted to fit wherever you choose to install it, and the station itself changes colors depending on the charging status of your electric vehicle, so you immediately know when your electric vehicle is still charging or ready to go. The station already has an integrated charging cable and allows you to provide charging up to 22 kW, so it will fully ensure maximum charging power, even for the most advanced electric vehicle.
Charging management is extremely simple using the myWallbox app and allows you to control the charger from any smart device via Wi-Fi or Bluetooth. You can manage charging schedules, receive notifications and much more. With Pulsar Plus, you have full control over the charging of your electric vehicle and will meet every day with a fully charged battery.
Powerful and durable
Designed and manufactured in Europe, the Pulsar Plus is built to be durable, certified water and dust resistant, with IP54 and IK08 protection levels, allowing for safe installation indoors or outdoors. Featuring up to 22 kW charging power, it weighs just 1 kg.
Managed
Each Pulsar Plus charging station has a built-in Wi-Fi module, allowing you to control and monitor your charging station from anywhere in the world. Don't worry if the internet suddenly disappears in the garage or parking lot, the built-in Bluetooth interface allows you to control Pulsar Plus even when kai you can't connect to the internet.
Smart
Schedule charging sessions and take advantage of off-peak electricity rates, monitor the status of your charging station, lock and unlock it remotely, receive real-time notifications and perform updates. All this is possible using the myWallbox app or browser. The charging status can also be monitored on your smartwatch. Pulsar Plus is also compatible with platforms that support the OCPP standard.

OUR PRACTICAL ADVICE

If you have a single-phase charging electric car or a plug-in hybrid car (which accepts up to 7kW during phase 1), it is important to choose the right charging station to ensure the most efficient charging. EVvaidai recommends choosing 22 kW electric car charging station.

Even when using single-phase charging, a 22 kW station will allow you to optimally use the available three-phase electrical input. In this case, if your electrical input is three-phase (22 kW) and the station is also 22 kW, you can achieve approximately 7 kW charging power.

This is an efficient and productive solution for those seeking maximum charging power for their electric or hybrid car.