11 kW 3-Phase wallbox charging station WB20 with Wi-Fi function

WB20 charging station 3-phase, 11 kW with type 2 cable - 5m long.

It is very convenient to control charging functions via the LCD screen, i.e. duration, power and other settings, see consumption history. The station can be controlled via Wi-Fi and the app.

Housing material: ABS+PC Plastic housing

Power cord connected from the bottom of the station

Charging interface Charging connector

Charging station dimensions 347*217*74mm

Weight 5-9kg

Input voltage 230V/400V AC Three-phase five-wire system
(A phase, B phase, C phase, neutral, PE)

Input current 16A

Frequency 50Hz /60Hz

Maximum power 11 KW

Measurement function Yes

Measurement accuracy class 2

Output voltage 230V/400V AC

Output current 16 A

Standby power ≤10W

Standard EN 61851-1:2019

MTBF 100 000 hours

Operating temperature -25 ～+55

Operating humidity 5%～95%

Altitude ＜2000m

IP rating IP66

Safety protections:

Overvoltage protection Yes

Low voltage protection Yes

Overload protection Yes

Short circuit protection Yes

Leakage protection Yes

Ground fault protection Yes

Overheat protection Yes

Lightning protection Yes

LED light Yes

RFID Only available with RFID version

APP only available with APP version

Touch screen Yes

OUR PRACTICAL ADVICE

If you have a single-phase electric vehicle or a Plug-in hybrid vehicle (which accept up to 7kW per 1 phase), it is important to choose the right charging station to ensure the most efficient charging. EVvaidai recommends choosing a 22 kW electric vehicle charging station.

Even when using single-phase charging, a 22 kW station will allow you to optimally use the available three-phase electrical input. In this case, if your electrical input is three-phase (22 kW), and the station is also 22 kW, you can achieve approximately 7 kW of charging power with one phase.

This is an efficient and effective solution for those seeking maximum charging power for their electric or hybrid vehicle.