Digital rectifier battery charger 6v 12v - 2a 4a - dvl dbc amio-02088

The DBC-4A charger can charge lead-acid batteries (regular and MF), Ca/Ca, AGM and gel batteries. It is a microprocessor charger, made in accordance with the IP65 standard, which means resistance to dust and splashes and low-pressure water jets. It has protection against: short circuitreverse battery connection (reverse polarity)open circuitspark protectionbattery overchargerectifier overloadrectifier overheatingit has 6 charging modes:6V up to 14Ah batteries7.2V up to 2A7.4V up to 2A (charging at low temperatures)12V up to 14Ah and deeply discharged batteries14.3V up to 2A14.7V up to 2A (charging at low temperatures)12V above 14Ah batteries14.3V up to 4A14.7V up to 4A (charging at low temperatures)It constantly displays the battery voltage and charge level and regulates the charging current depending on its needs. After charging, it displays the message FULL and maintains the battery voltage.xa0Specification:Power supply voltage 230V 50 HzOutput voltage: 6/12VPower consumption: about 60W (1W standby)Maximum charging voltage:7.4V (for 6V batteries)14.7V (for 12V batteries)Maximum charging current: 2A +/- 10%,4A +/- 10%Supported battery capacities:6V - 1.2Ah to 14Ah12V - 1.2Ah to 14Ah and 14Ah to 120AhProtection class: IP656 charging programs switched by the "OPERATION MODE" buttondisplay backlightxa0Gel batteries with a capacity of up to 14Ah used in motorcycles and scooters should be charged by selecting the program with the motorcycle icon on the display.Charging with a higher current may damage the battery.