Digital coating thickness gauge

Coating thickness gauge

Digital coating thickness gauge allows you to check the thickness of the paint or varnish layer on magnetic (iron, steel) and non-magnetic (aluminum, copper, brass) surfaces. It is used for non-invasive measurement of paint thickness on car bodies. It is also intended for measuring the thickness of non-magnetic coatings (including paint, varnish, glass, plastic, epoxy resin, putty, enamel, etc.) on steel, galvanized steel and aluminum. The gauge can be used to check the thickness of the varnish layer before starting the polishing process. It has a wide measurement range (up to 1700 µm), quickly and accurately performs measurements and prepares for a new measurement. Suitable for use in car workshops, service stations, vehicle inspection stations, used car sales, paint shops and other diagnostic areas.

Features:

• Non-invasive magnetic measurement technology.
• The meter is calibrated, the kit includes calibration plates for checking accuracy.
• FE (iron) calibration plate is intended to prepare the device for measuring the coating of magnetic surfaces, NFE (aluminum) calibration plate - for non-magnetic surfaces.
• Selectable measurement units (1mil=25.4µm; 1µm=0.03937mil).
• Data storage holds up to 30 measurements, power off does not delete data.
• Clear 2-inch illuminated display with battery discharge indicator. The screen can be rotated 180 degrees to make it easier to read the measurement results.
• One time / continuous measurement.
• Warnings when (upper/lower) measurement limits are exceeded.
• Automatically turns off after 60 seconds.
• Informs about the measurement results with an audible signal.
• Measures iron, steel, galvanized steel, copper and aluminum surfaces - suitable for industrial and household use.
• Ergonomic shape, comfortable to hold in the hand, durable body. Comes with a black zippered storage case.

Technical data:

• Measuring range: Magnetic materials 0~1700 µm; Non-magnetic materials 0~1700 µm.
• Measurement resolution: 0.1µm @(0~99.9µm); 1µm @(100~1700µm).
• Error: +/-(2+2%*H)µm @(0-500µm); +/-(2.5%*H)µm @(500-1700µm).
• Min. measuring area: 25x25mm (magnetic/non-magnetic materials).
• Min. curvature: convexity 5mm; concavity 30mm.
• Min. measured thickness: Magnetic materials 0.2mm; Non-magnetic materials 0.05mm.
• Measurement units: mil / µm (1mil=25.4µm; 1µm=0.03937mil).
• Batteries: 2x 1.5V AAA (included).
• Data storage: 30 measurements.
• Operating temperature: 0°C ~ +50°C.
• Working humidity: 10-80% RH.
• Storage temperature: -10°C ~ +60°C.
• Storage humidity: 10-70% RH.
• Calibration: zero point calibration / calibration plate calibration.
• Limited value measurement: yes.
• Automatic device shutdown: within 60 seconds
• Gauge size: 120x52x26 mm.
• Storage case size: 200x110x45mm.
• Calibration plates box size: 28x54x11mm.
• Weight: 87g.