Alphacool 11969 computer cooling system part / accessory
Product reference: 29-4250197119696

Alphacool 11969, Water block, Acrylic, Copper, Nickel, Plastic, Black, Transparent, 1/4", 60 °C, Box

Alphacool 11969 computer cooling system part / accessory

Product reference: 29-4250197119696

Alphacool 11969, Water block, Acrylic, Copper, Nickel, Plastic, Black, Transparent, 1/4", 60 °C, Box

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
75,13 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
5 - 10
business days

Your message has been successfully sent!
Fill in the required fields*

Alphacool 11969. Type: Water block, Material: Acrylic, Copper, Nickel, Plastic, Product colour: Black, Transparent. Package type: Box
M.2 SSDs are becoming increasingly popular. Their high transfer rates and extremely low access times allow for faster and more efficient work or gaming on the PC. To ensure that the full performance of the M.2 2280 SSD can be consistently utilized, Alphacool offers the HDX Apex Acrylic aRGB M.2 2280 SSD cooler. It is a useful addition to any water cooling loop and ensures that the M.2 SSD can reach its full potential.
Why use an active M.2 cooler?
Due to their design, M.2 SSDs can only maintain their maximum performance for short periods. The controller chip heats up extremely quickly and begins throttling the M.2 SSD's performance early on to prevent overheating. Independent tests have shown that write speeds on uncooled M.2 SSDs can drop after just 30 seconds. For read operations, throttling usually occurs a few seconds later. The Alphacool HDX Apex Acrylic aRGB M.2 2280 SSD cooler allows you to utilize the SSD's maximum performance for a significantly longer period. This is clearly noticeable during extended read and write operations.
Montage
The HDX Apex Acrylic aRGB cooler is compatible with M.2 2280 SSDs that are populated on one or both sides. If the PCB is populated with memory chips on both sides, the 0.5mm thermal pad is used on both sides. If memory chips are only installed on one side, the 1.5mm thermal pad is used on the side without chips. After the top and bottom of the SSD have been fitted with thermal pads, the SSD is inserted into the retaining clip and mounted under the cooler. Installation on the motherboard then proceeds as usual. The cooler can now be integrated into the water cooling loop using the existing G1/4" fittings.
Copper instead of aluminum!
Alphacool uses only copper in its water coolers. The reason is simple: copper has almost twice the thermal conductivity of aluminum and is therefore the obviously better material choice for water cooling.
Brilliant lighting
The cooler features three digitally addressable 5V RGB LEDs, creating a unique and elegant lighting effect. The digital aRGB LED lighting connects via a JST 3-pin connector. To control the aRGB lighting, the cooler must be connected to a digital RGB controller or a digital RGB-compatible motherboard using an adapter. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector.

Features

Type: Water block
Material: Acrylic, Copper, Nickel, Plastic
Product colour: Black, Transparent
Connecting thread: 1/4"
Maximum operating temperature: 60 °C

Packaging data

Package type: Box


Manufacturer code11969
Weight0 kg
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial