Alphacool 11968 computer cooling system part / accessory
Product reference: 29-4250197119689

Alphacool 11968, Water block, Acetal, Copper, Nickel, Black, 1/4", 60 °C, 0.8 bar

Alphacool 11968 computer cooling system part / accessory

Product reference: 29-4250197119689

Alphacool 11968, Water block, Acetal, Copper, Nickel, Black, 1/4", 60 °C, 0.8 bar

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
72,21 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
5 - 10
business days

Your message has been successfully sent!
Fill in the required fields*

Alphacool 11968. Type: Water block, Material: Acetal, Copper, Nickel, Product colour: Black. Width: 25.6 mm, Depth: 68 mm, Height: 16.8 mm. Package type: Box

SSDs in M.2 format are becoming increasingly popular. The high transfer rates and extremely low access times allow faster and more effective working or playing on the PC. Alphacool offers the HDX Apex Acetal M.2 2280 SSD cooler so that the full performance of the M.2 2280 SSD can be used permanently. It is a useful addition to any water circuit and ensures that the M.2 SSD memory can release its full potential.

Why an active M.2 cooler?
Due to their design, M.2 SSDs are only able to deliver their maximum performance for a short time. The controller chip heats up extremely quickly and begins to throttle the performance of the M.2 SSD at an early stage in order to avoid overheating. Independent tests have shown that during write operations, the transfer rates of uncooled M.2 SSDs can drop after just 30 seconds. With read processes, the throttling usually occurs a few seconds later. With the Alphacool HDX Apex Acetal M.2 2280 SSD cooler, the maximum performance of the SSD can be used over a significantly longer period of time. This is clearly noticeable during longer read and write processes.

Mounting
The HDX Apex Acetal cooler is compatible with M.2 2280 SSDs that are mounted on one or both sides. If the PCB is populated with memory chips on both sides, the 0.5mm heat conduction pad is used on both sides. If memory chips are only installed on one side, then the 1.5mm heat conduction pad is used on the side without chips. Once the top and bottom of the SSD have been fitted with thermal pads, the SSD memory is pushed into the retaining clip and mounted under the cooler. The installation on the mainboard is then carried out as usual. The cooler can now be integrated into the water circuit using the existing G1/4" connections.

Copper instead of aluminium!
Alphacool only uses copper in its water coolers. The reason is simple: copper has almost twice the thermal conductivity of aluminium and is therefore the obviously better choice of material for a water cooler.


Features

Type: Water block
Material: Acetal, Copper, Nickel
Product colour: Black
Connecting thread: 1/4"
Maximum operating temperature: 60 °C
Maximum operating pressure: 0.8 bar

Weight & dimensions

Width: 25.6 mm
Depth: 68 mm
Height: 16.8 mm
Weight: 43 g

Packaging data

Package type: Box


Gamintojo kodas 11968
Weight 0 kg
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial