Alphacool 11999 computer cooling system
Product reference: 29-4250197119993

Alphacool 11999, Air cooler, 12 cm, 118.9 m³/h, Black

Alphacool 11999 computer cooling system

Product reference: 29-4250197119993

Alphacool 11999, Air cooler, 12 cm, 118.9 m³/h, Black

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
224,78 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
5 - 10
business days

Your message has been successfully sent!
Fill in the required fields*

Alphacool 11999. Type: Air cooler, Fan diameter: 12 cm, Airflow: 118.9 m³/h, Maximum air pressure: 3.17 mmH2O, Bearing type: Sleeve bearing. Voltage: 6 - 13.5 V. Product colour: Black

The Eisbaer Aurora HPE Edition 360 CPU AIO water cooling features the extremely powerful NexXxos HPE Performance all-copper radiator equipped with the high-throughput Aurora Rise 120mm fans. All of the components used come from the classic DIY water cooling range and are also used for the most part in the enterprise products for servers. The Eisbaer LT Aurora can be expanded with additional components thanks to the quick-release fastener. Alphacool's Eisbaer Aurora HPE Edition 360 CPU AIO is a high performance all-in-one water cooling system that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop.

New HPE Radiator!
The NexXxos ST30 HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.

Radiator & Pump
As with all Alphacool products, the radiator base is made of nickel-plated copper and is equipped with very fine cooling fins that are distributed over the entire base. A nozzle plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. The Eisbaer LT Aurora cooler uses the very compact and small DC-LT 2 pump. It provides enough power to add another component such as a GPU water cooler or another radiator to the circuit.

Fan
The Alphacool Rise Aurora fan offers a wide control range as well as superior Digital aRGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design create unique effects. The fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. Additionally, it offers a Zero control, which allows the fan to be regulated down to 0 RPM and then starts at approximately 350 RPM. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m³/h) paired with high static pressure (3.17mm/H O).

DIY connections and ES hoses
The hose connections are from the normal DIY segment and therefore use a G1/4" thread. Thus, it is very easy to replace them. The black TPV hose comes, like the connectors, from the Alphacool ES series which is primarily installed in servers and workstations. The hose does not contain any plasticizers and, unlike classic PVC hoses, does not deform at high temperatures. The quick connector is not made of heavy brass, but of extremely light, durable and robust nylon. The quick disconnect is compatible with many other models in the Alphacool product line.

Full Digital aRGB Illumination
The cooler pump assembly and fans are fully equipped with Digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set with the included controller or a Digital RGB controller on the motherboard. For a nice visual effect, of course, the illuminated polar bear on the cooler pump unit. For easier control via a controller, the fans and also the pump can be connected in series as a daisy chain. This enables a neat wiring of the individual LED components.

Performance

Suitable location: Processor
Type: Air cooler
Fan diameter: 12 cm
Noise level (high speed): 31.5 dB
Airflow: 118.9 m³/h
Maximum air pressure: 3.17 mmH2O
Feature: Pulse-width modulation (PWM) support
Bearing type: Sleeve bearing
Fan bearing technology: Sleeve bearing
Quantity per pack: 1 pc(s)
Pump motor speed (max): 2600 RPM
Fan speed (min): 0 RPM
Fan speed (max): 2500 RPM

Design

Product colour: Black
Material: Acrylic, Copper, Nylon, Stainless steel
Radiator material: Copper
Number of fans: 3 fan(s)
Fins material: Copper
Feature: Illumination LED
Number of LEDs: 20
Illumination colour: Multi
Fan connector: 4-pin

Power

Voltage: 6 - 13.5 V
Pump power consumption: 3.2 W
Fan voltage: 12 V
Fan current: 0.65 A

Weight & dimensions

Radiator width: 39.1 cm
Radiator depth: 12.4 cm
Radiator height: 3 cm
Tube length: 40 cm
Tube diameter: 1.27 cm
Fan dimensions (W x D x H): 120 x 120 x 25 mm
Package width: 435 mm
Package depth: 255 mm
Package height: 145 mm
Package weight: 3.37 kg

Technical details

Feature: Sustainability compliance
Compliance certificates: CE, RoHS


Gamintojo kodas 11999
Weight 0 kg
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial