Alphacool Core Distro Plate
Product reference: 29-4250197154789

Alphacool Core Distro Plate, Pump & reservoir, Acrylic, Aluminium, Ceramic, Synthetic, Black, Transparent, 3-Pin JST + 3-Pin 5V, 1/4", 3-pin

Alphacool Core Distro Plate

Product reference: 29-4250197154789

Alphacool Core Distro Plate, Pump & reservoir, Acrylic, Aluminium, Ceramic, Synthetic, Black, Transparent, 3-Pin JST + 3-Pin 5V, 1/4", 3-pin

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
234,80 €
Product in warehouse

Guarantee
24 month

Delivery from Europe in
5 - 10
business days

Your message has been successfully sent!
Fill in the required fields*

Alphacool Core Distro Plate. Type: Pump & reservoir, Material: Acrylic, Aluminium, Ceramic, Synthetic, Product colour: Black, Transparent. Width: 125 mm, Depth: 240 mm, Height: 93.3 mm. Quantity per pack: 1 pc(s), Package width: 140 mm, Package depth: 305 mm. Power cable length: 0.48 m, RGB voltage: 5 V

The Core Distro Plate from Alphacool with VPP Apex pump is a must have for any costum water cooling system. It greatly simplifies the construction, planning and maintenance of complex water loops and due to the already pre-installed VPP Apex, no additional pump installation is necessary.

Core Design
A core element of Alphacool's Core Design series are the chrome-plated, brass G1/4" connectors. With the Core Distro Plate, the ports are recessed instead of screwed into a thread as is usually the case. This allows Alphacool to overcome the problem of potential leakage due to cracking by screwing the connectors directly into the acrylic. The connectors are made of two parts, have an O-ring and counter each other when mounted in the acrylic. This not only ensures absolute leak proofing of each connector, but also allows for the clean and functional look of Alphacool's Core Design series.

Easy installation
Using the included Core Push Mounting kit, the Distro Plate can be mounted on the case panel or on a radiator. To do this, the metal pins are attached to the radiator or the panel of the PC case and the matching female sockets are attached to the Distro Plate (see manual). The next assembly step is to simply push the Distro Plate onto the pins without the need for any tools. Alphacool's push-mounting allows for a tight fit of the Distro Plate on the case panel or radiator and allows for easy removal for maintenance or expansion projects.

Gamechanger
It has an integrated reservoir as well as a VPP Apex pump and is offered as a 240mm or 360mm variant, each with left or right positioning of the pump top. This makes the Core Distro Plate ideal for custom water loops where CPU and graphics card(s) are to be cooled simultaneously. Due to the arrangement of the G1/4" connections, complicated tubing paths will be a thing of the past in the future. There is an additional drain port on the side, with which the Distro Plate can be drained easily and comfortably.

High-quality material selection & brilliant illumination
Alphacool's Core Distro Plate is made of high-quality acrylic. This allows an unobstructed view of the coolant and enables brilliant illumination from the built-in digitally addressable aRGB LEDs. The lighting can be controlled via a digital aRGB header on the mainboard or optionally by Alphacool's Aurora Eiscontrol aRGB controller (item no.: 15360).

The pump
Alphacool's Apex VPP doesn't use a spherical bearing and relies on a ceramic axle. The motor's coils have been moved from the inside to the outside. These changes have the effect that the pump is fundamentally more stable and smoother running, and any vibrations that arise have been significantly reduced. Another positive side effect is that power consumption has been almost halved as a result.

Control
The Apex VPP pump has a 4-pin fan connector that connects to the motherboard or to an external controller. This allows you to control the speed range of the pump via PWM and read out the RPM signal. The pump is connected to the power supply using a SATA connector.

Features

Type: Pump & reservoir
Material: Acrylic, Aluminium, Ceramic, Synthetic
Product colour: Black, Transparent
ARGB ports quantity: 1
RGB connector: 3-Pin JST + 3-Pin 5V
Connecting thread: 1/4"
Power connector: 3-pin
Maximum operating temperature: 60 °C
Maximum operating pressure: 0.8 bar
Coolant capacity: 0.164 L
Feature: Pulse-width modulation (PWM) support
Maximum flow rate: 5.7 l/min
Feature: Easy to use
Suitable for: Motherboard
Certification: CE, FC, RoHS

Weight & dimensions

Width: 125 mm
Depth: 240 mm
Height: 93.3 mm
Weight: 1.54 kg

Packaging data

Quantity per pack: 1 pc(s)
Package width: 140 mm
Package depth: 305 mm
Package height: 100 mm
Package weight: 1.84 kg
Package type: Box
Packaging content: 1x 240 Distroplate1x VPP Apex Pump1x M4 Allen Key3x Screw Plug6x Core Push Mount Set1x ARGB Adaptor

Power

Power cable length: 0.48 m
RGB voltage: 5 V


Gamintojo kodas 15478
Weight 0 kg
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial