ARCTIC P12 SLIM PWM PST case fan, 4-pin, 120mm, slim (Black)

Case fan P12 Slim PWM PST, 4-pin, 120mm, black
Features:

• Suitable for small spaces. Unlike standard 120mm case fans, which are 25mm thick, this fan has a mounting depth of only 15mm. This makes it ideal for small form factor (SFF) builds. The corresponding screws for mounting to the radiator are already included in the kit.


• PWM PST technology allows you to connect multiple fans (up to 5 recommended) and synchronize their speed based on the actual cooling needs of the computer. This way, the entire cooling system operates more efficiently and quietly, and the overall energy consumption is lower than when connecting each fan/cooler separately.


• Optimized for static pressure. When developing the new P12 Slim PWM PST fan, special attention was paid to focused airflow, static pressure. This fan guarantees extremely efficient cooling, even with increased air resistance.


• High-quality bearing. A combination of alloy and grease developed in Germany reduces friction in the bearing and provides greater efficiency. This results in less heat and noise from the bearing, so you can enjoy a longer lifespan for your fan.


• Maximum silence, minimum vibration. Even at low speeds, the operating sound of the new ARCTIC motor is barely noticeable. Thanks to the sinusoidal magnetization, the new motor is very smooth and almost vibration-free - it produces only about 5% of the vibration level of a conventional DC motor without a filter.


• Cooling efficiency: A number of improvements, such as updated motor technology and a newly designed fan design, have significantly increased the performance of the P-Series fans. In performance tests at 28 dB(A), the new P-Series fans outperformed many competitors.


• 300-2100 rpm speed, adjustable via PWM. Thanks to the 4 pins, the speed can be adjusted over a wide range via PWM (pulse width modulation). This way, noise is minimized and maximum cooling efficiency is ensured when needed.


• Longer service life. The new ARCTIC motor generates significantly less frictional heat than its predecessors and current competitor models. This reduces coil temperature by up to 20 degrees and extends service life by four times, while reduced friction losses ensure more efficient operation.


• 0dB mode - zero speed. The fan speed can be reduced to zero speed using PWM. This ensures efficient and quiet computer operation at idle, and maximum performance is guaranteed when needed.


• Two modes of operation. Blowing warm air out of the housing. Blowing cold air into the housing.

Technical data:

• Speed: 300-2100 rpm.


• Airflow: 42.1 CFM / 71.53 m³/h.


• Static pressure: 2.2 (mm / H2O).


• Noise level: 0.3 Sone.


• Bearing: fluid dynamic bearing.


• Voltage/current: 0.12A/ 12V DC.


• Initial voltage: 5 V.


• Connector: 4-pin + 4-pin sockets.


• Cable length: 400 mm.


• Dimensions: 120x120x15 mm.


• Color: black.


• Weight: 85 g.