Citroen nac 9 or 12 inch camera interface

The interface adds a rearview camera to your car and displays the image on your original car radio (which must be prepared for this). Some adapters are plug-and-play solutions, while others require connecting cables or other modifications. Please read the installation instructions first or contact us with any questions.xa0In addition to the adapter, you'll need a rearview camera. We also encourage you to check out our full offer in the xa0reversing cameras tab.The video interface allows you to connect a reversing camera, an automatic front camera and other video sources (e.g. USB player, DVB-T2 tuner, ...) to the vehicle manufacturer's factory infotainment system.xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0Features 1 composite video input for reversing camera 1 CVBS front camera video input 1 FBAS video input for retrofit devices (e.g. USB player, DVB-T2 tuner, ...) Automatic switching to the reversing camera input when reverse gear is engaged; Automatic switching of the front camera when reverse gear is disengaged for 10 seconds Activation of the image while driving (ONLY for the inserted video) NTSC compatible video input Brand and model: Citroen C3 Aircross 06/2021 -> Navigation: NAC with 9-inch touchscreen monitor Citroen C5X from 02/2022 Citroen DS7 Crossback from 03.2017 Citroen DS9 from 11.2020 Navigation: xa0NAC or DS Connect Radio/Nav with 12-inch touchscreen monitorxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 Limitations Videos only - The interface does NOT transmit any audio signals. The factory AUX audio input or an FM modulator can be used to transmit audio signals.Factory Backup Camera -xa0Automatic switching to the factory backup camera is only possible when reverse gear is engaged (switching cannot be delayed). Automatic switching to the factory backup camera does not work from the video mode of a video source connected to the interface's video input.Aftermarket Front Camera -xa0Switching to the front camera occurs automatically after disengaging reverse gear for 10 seconds. Manual switching to the front camera is not possible. Video input signal -xa0Only compatible with NTSC video source.Inputs : Image input: 4-pin HSD Power and CAN bus: open cable ends (power) and Plug Play (vehicle dependent, CAN) Reversing camera input: RCA socket Front camera input: RCA socket Video input: RCA socket Technical specifications:xa0 Operating voltagexa0xa0 xa012VDC (9~16V) Quiescent currentxa0xa0 xa05mA Power consumptionxa0xa0 xa0190mA Video input formatsxa0xa0 xa0NTSC Operating temperaturexa0xa0 xa0-20°C to +70°C Video box dimensionsxa0xa0 xa0122x83x26mm (W x H x D)Note Legal: Drivers must not be distracted, directly or indirectly, by moving images while driving. This is prohibited by law in most countries/states. Other than operation when stationary, this product is only intended to display menus in a standing position (e.g., MP3 menus from DVD players) or rearview camera images while driving.