Ciśnieniomierz cyfrowy 10 bar 3-150 PSI AMIO-02940

Top-quality digital tire pressure gauge for cars, motorcycles, etc.

Adapted to standard car valves.

CHARACTERISTIC

• Replaceable, lithium battery LR44 - 2 pcs (included).
• Measuring range 0.3-10 bar, 3-150 psi
• No calibration required.
• Excellent measurement repeatability, unattainable with analog manometers.
• Digital, easy-to-read display.
• A special profile that makes it easier to take measurements, even on unusual alloy rims.
• High standard measurement accuracy +/- 2%.
• Energy-saving.
• The offered pressure gauge has 3 different units of measuring tire pressure - psi, bar

Check the manufacturer's recommended tire pressure specifications.

• Press the ON button. The display will show 8.8.8 with 4 units: psi, bar, kPa and kg/cm2.
• In the next step, the message 0.0psi or 0.00bar or 0.00kg/cm2 or 0kpa will appear.
• Now you can press the ON button to change units (psi>bar>kpa>kg/cm2).
• Place the gauge nozzle on the tire valve. Press firmly to ensure no air escapes. Wait 1-2 seconds, remove the nozzle from the valve, and read the tire pressure on the LCD display. Repeat for the other tires.
• The display will remain illuminated with the pressure reading for approximately 20 seconds. The gauge will then automatically turn off to save power.
• The pressure gauge can be turned off manually by pressing the ON button for approximately 3 seconds.

NOTE: You can continue to use the pressure gauge even though the previous reading is still displayed.

• If you see the low battery symbol on the display, the power has been exhausted.
• If you observe an unusually low reading: Make sure there is no sound