RelayLightCore (1-gang) Jeweler, Relay for a 1-gang switch., LightCore (1-gang) vertical Jeweler, Relay for a vertical 1-gang switch.
Touch panelsSoloButton (1-gang) It is used when the 1-gang switch is installed as a separate device. SoloButton consists of the front panel and the frame, coming as one component. CenterButton (1-gang) It is used when the 1-gang switch is installed between the device sets. CenterButton (1-gang) vertical It is used when the vertical 1-gang switch is installed between the device sets. SideButton (1-gang) It is used when the 1-gang switch is installed on the right or left of the device set. SideButton (1-gang) vertical It is used when the vertical 1-gang switch is installed on the top or bottom of the device set.
FramesFrames for two, three, four, and five Ajax switches and outlets in any combination¹., Frame (2 seats) Frame (3 seats) Frame (4 seats) Frame (5 seats) Frame (2 seats) vertical Frame (3 seats) vertical Frame (4 seats) vertical Frame (5 seats) vertical, 1 — Combinations with outlets are available only in horizontal orientation.
Configuration
Single switchLightSwitch (1-gang) Jeweler is installed as a separate device.
Combination switchLightSwitch (1-gang) Jeweler is combined as a set with Ajax smart switches and/or Outlet Jeweler devices and installed into Frame side by side., Learn more
Communication
Jeweler communication technologyProprietary wireless communication technology to transmit commands, alarms, and events., Key features:, Two-way communication., Advanced anti-sabotage., Block encryption featuring a dynamic key., Instant notifications., Remote configuration via Ajax apps., Learn more
Radio frequency bands866.0-866.5 MHz 868.0-868.6 MHz 868.7-869.2 MHz 905.0-926.5 MHz 915.85-926.5 MHz 921.0-922.0 MHz, Depends on the sales region.
Maximum effective radiated power (ERP)up to 20 mW
Radio signal modulationGFSK
Radio communication rangeup to 3,600 ft, Between the device and a hub (or range extender) in an open space., Calculate radio communication range at the facility
Encrypted radio communicationAll the data stored and transmitted are protected by block encryption featuring a dynamic key.
Radio frequency jumpsRadio communication uses frequency hopping to prevent interception and jamming., Learn more
Main features
Automation scenariossecurity mode change reactions, scheduled actions, alarm reactions, temperature scenarios, humidity scenarios², CO concentration scenarios², by pressing another LightSwitch/Button, Learn more, 2 — Scenarios by humidity and CO concentrations are available when LifeQuality Jeweler is added to the system.
Operation without neutral wireLightSwitch only needs a live wire to operate.
Switchable device powerfrom 5 to 600 W
Contactless touch panelLightSwitch is activated when a hand gets as close as 15 mm from the panel.
Night lightingOptional, can be turned off in the Ajax app device settings.
Protection against incompatible devicesTriggers if lighting devices have insufficient power (up to 5 W). If protection is triggered, LightSwitch turns off the power and sends a notification to Ajax apps. For low-power lighting devices, the kit includes a capacitor.
Protection against sabotage
Protection against counterfeitingdevice authentication
Loss of connection detectionafter 36 s, Detection time depends on the Jeweler or Jeweler/Fibra settings., Learn more
Power supply
Supply voltage230 V~, 50/60 Hz, The device does not need a neutral wire to operate.
Average costsup to 200 mW
Maximum power600 W, For LightCore (1-gang) Jeweler and LightCore (1-gang) vertical Jeweler.
Current protectionmore than 2.6 A, If protection is triggered, LightSwitch turns off the power and sends a notification to Ajax apps.
Temperature protectionmore than 140 °F, If protection is triggered, LightSwitch turns off the power and sends a notification to Ajax apps.